Audio/Interior Build Thread

patrick4588

Integra God
carpet came in. maybe this weekend ill put it in. gotta take the rear seat delete out and thats not fun so ill need the whole day. also going to change my tail light gaskets while i got everything out. also got a nitrous express bottle jacket and an itr front lip. will update with pictures this weekend as i start working.
 

patrick4588

Integra God
installed a decent amount of rattle trap on my drivers door. i need to put some on the very inside that touches the part of the door with the handle. it still rattles with the amount on their now. here is a work in progress picture i took with my phone before it got too dark. i completely covered the other part of the door.
 


patrick4588

Integra God
both doors are fully covered in rattle trap. this weekend im taking all the interior out to swap the carpet and add more rattle trap to the cabin. also ordered some corbeau 3" 5 point camlock harnesses today. so next on the interior list in seats and a harness bar.
 

patrick4588

Integra God
so i started everything today. its a lot more work than i figured it would be. the carpet came molded, but its not cut to fit or have any holes cut for seats or other stuff. here is some progress pics. sorry, from my camera phone. right now im trimming it and ill update again once i finish.


 

patrick4588

Integra God
well after about 4 hrs of work i am done. its not perfect, but its good enough. there are a few wrinkles, but i think those will go away over time. it looks a ton better and im happy with it. i am kinda pissed that its about to rain though and i have a leak into my passenger floorboard so it may get my new carpet wet. i have yet to find the source of that leak. sorry for the cell phone pictures, it is all i have right now. ill get my gf's digital camera sometime tomorrow and take some good pictures.
 

jdmjim

nothing from nowhere
that looks great dude. the wrinkles should get better.the bad thing about that kind of carpet is that your scared to death making a wrong cut and ruining it.
 

patrick4588

Integra God
well i dont have back seats or a center console so the only cuts i had to make were really for the seats. i trimmed about 3" all th way around it and it fit pretty good. i cut it down the middle when i put it on so it went on smooth. since i didnt have the tabs like the stock carpet does to hold onto the step thing where the door closes; i left a little extra there and wrapped it inside the panel. holds pretty well.
 
You must log in or register to reply here.
Top