ABS Fuse Pull

Simple where is this fuse anyone have a picture cause it not in the fuse box so it has to be alone somewhere please help me out i have googled this and cant find it i just need to know where the abs fuse is
 
any chance you can find a pic cause i cant find what you are talking about i see the main fuse box but the diagram shows no abs, and by the motor you mean the module? i dont see a fuse box on the module sorry
 


Cripton805

New Member
If I can remember, it says ABS in clear very large letters. It's a seperate little box to the left of the intake.
 
i will take a pic under my hood i dont see that how everyone describes it, it sounds so easy but i dont see it
 


Cripton805

New Member
Whoops. This is a DA not a DC.

I've never looked into them because mine didn't have ABS. (THANK GOD)
Thinking about it, it might be under the dash panel. (Hidden) like the main relay.
 
does anyone have a DA with ABS that know how to turn it off and i dont mean the lift the hand brake and drive a little with it no fully engaged trick till light goes on
 
There is no cut off switch to the ABS. Why do you want to turn it off? Is it not functioning properly?
You can pull the fuse(like you were asking about). It is located in that "C" shaped fuse box that is located on top of the passenger side front shock.
Other than that, you could possibly "turn it off" by cutting the power wire to the ABS control module.
 
which fuse is it in there cause the diagram does not show a abs fuse
oh and its cause its been making funny noises and it has been acting up when i brake hard when going fast, i dont have time to work on abs right now so i would rather turn it off for now and work on it later
 
If it's acting up the pump or the accumulator is probably going bad. I have only seen a handful of G2s that still have properly functioning ABS.
I recommend just pulling the fuse to the main ABS relay.
I couldn't find a decent pic on the web, so here's a pic of my fuse box. Hope this helps.
 
Last edited:
Top