90 ls tail lights always on
- Thread starter screbels
- Start date
DAWGSwlms22
New Member
check the sensor under the brake pedal. my 90 GS did this once, and the thing that hits the sensor broke. here's some pictures.
you can barely see the button that turns on the lights whenever the pedal is pressed in. the bolt on the pedal is what i put in to fix it.
and here it is with the brake pedal not pressed. the bolt head is where something was broke off. i'm not sure what went there before, so just see if that button is unpressed when the brake isn't touched.
you can barely see the button that turns on the lights whenever the pedal is pressed in. the bolt on the pedal is what i put in to fix it.
and here it is with the brake pedal not pressed. the bolt head is where something was broke off. i'm not sure what went there before, so just see if that button is unpressed when the brake isn't touched.
GHOST1207
New Member
If none of the solutions above work, try disconnecting the brake switch and switch it for another one or new one. Had the same issue right when I bought my Teg, except the brake lights would stay on whether or not the brake switch was pressed. Turned out to be a bad brake switch, so I just got another one off my buddy's DA.
92gsrboy
New Member
Ok so this problem just happened to me...got a new brake switch and the brake lights still stay on...anyone have a different reason why they would still stay on...and i was so sure it was the brake switch because when i unplugged the one that was originally in there they turned off
Last edited:
DAWGSwlms22
New Member
did you make sure that the switch was making contact with the pedal?
if it is, and still having the problem, only thing i could suggest is to start tracing wires. maybe some are crossed or something.
if it is, and still having the problem, only thing i could suggest is to start tracing wires. maybe some are crossed or something.