TheGrindle
New Member
Roughly a 10 months ago I purchased a 98 Ls that had been swapped to a B18C1 by the seller. He was a "mechanic" and did alot of unique work that i have now fixed generally speaking. When i went to get emissions, the car was hooked up but could not be read by any of the three places I went to. Power is flowing to the obd2 port but no information. The final place I went to told me it was the ecu. After some searching, I found that the ecu in the car was a P28. To my understanding thats an obd1 ecu. I looked at my engine and found that I have 8 wires coming from the distro and the starter and alternator are not stock but the alternator has a green harness clip connected. Im not sure if the wngine is obd2 or not but if the engine is obd2 then swapping the ecu to a p75 would work? Im not really familiar with ecus as I should be but I need to pass emissions and quickly. Any help would be appreciated!