01 Boosted ITR

darbs242

New Member
Hello members, Im new on the forum and just wanted to say what up. Im rocken an 01 USDM Acura ITR #784 converted to JDM with a pretty long list...

original b18c5 with original transmission
Fujita competition cold air intake
LHT performance 68mm throttle body
LHT performance ported S-tube
Jackson racing Race supercharger kit 11psi.... freshly rebuilt by Magnason superchargers in april 2010
LHT performance air/liquid intercooled intake manifold
LHT performance intercooler heat exchanger kit
Hondata intake manifold gasket
Rc 440 injectors
Blox adjustable fpr
Jackson racing 160 deg thermostate
Skunk2 tuner series adjustable cam gears
Kamikaze supercharger/nitrous specific 4-1 race header with optional 2 1/2in downpipe heatwrapped with cooltec
Custom test pipe
5zigen race exhaust... its loud and sounds awesome.
Holly NOS wet nitrous system with manual zex bottle heater programed through Hondata S300 (30 shot)
Tuned on a Hondata s300 by Evans tuning
Ingalls torque damper
Walbro 255 fuel pump
Cusco Exhaust bushings

Drivetrain:
Volk TE-37 16x7.5
Competition Stage 2 clutch with street pressure plate
ACT street flywheel 12lbs
Skunk2 single bend short shifter
Energy Suspension shifter bushing kit
Driveshaft shop 2.9 Axels rated for (475hp).
Fresh transmission build by Sherear Acura using Gear X carbon lined syncros and oem part

Suspension:
Buddy Club N+ coilovers
Buddy Club P1 Racing adjustable camber kit (front & rear)
Skunk2 lower control arms
Password JDM 3pt front strut tower bar
Authentic Mugen rear strut tower bar
stock type R rear trunk brace and lower tie bar

Brakes:
Hawk HPS pads
Brembo drilled slotted rotors in the front
Stock honda rotors in the rear, stock calipers painted red, honda brake fluid and stock brake lines

Interior and Exterior modifications
Complete 98spec JDM ITR front end conversion professionally installed & painted
98spec JDM ITR DC-2 Recaros
98spec JDM ITR Momo NON-SRS Honda steering wheel
98spec OEM JDM ITR shift boot
All the correct and real OEM Honda badging
PLX wideband digital gauge intergraded into Hondata S300 and tuned in close loop for amazing 31mpg highway
Autometer carbon fiber boost gauge
Razo Race Pedals

Stereo
Alpine head unit with hardwired ipod connection
JL audio C2 6 1/2 components in the front
JL audio C2 6 1/2 in the rear
JL audio 4ga. wire kit
Powered by a JL audio 300/4 slash v2









 

myxintegra

Extreme Music Addict
Nice teggy man! interesting... yellow body on bronze wheels. never seen that.
 


ACJett

Enthusiast
Welcome!
Very nice.

#00-445 ITR here.
We have very similar car/goals (although you are further along).
Mine is tuned at Evans also...
I'm looking to add the LHT goodies and bump up my boost pulley asap. I'm sticking with the USDM front though...

Looks great :)
 

darbs242

New Member
Welcome!
Very nice.

#00-445 ITR here.
We have very similar car/goals (although you are further along).
Mine is tuned at Evans also...
I'm looking to add the LHT goodies and bump up my boost pulley asap. I'm sticking with the USDM front though...

Looks great :)
what do you have for mods at this point?
 


alvarez

JDM Superstar
Good stuff man, looks good. I'm still looking for seats and mats to make mine look like that. =]
 

OlegWasHere

New Member
nice setup
first integra ive seen with some nos...

how much did the jl audio system run you?
im looking to do something similar.
ever since my decked out jl audio system in need for speed underground 2 :oops:
 

ACJett

Enthusiast
what do you have for mods at this point?
As it sits currently....
AEM CAI
DC ceramic header
Tanabe Super Medallion Racing Spec Cat-back exhaust
AEM Fuel Rail
Injector Dynamics 725cc Saturated Injectors
Walbro 255lph fuel pump
Jackson Racing Supercharger w/ 6lb pulley
P28 obd1 ECU
HONDATA s300 (Tuned by Jeff Evans - Evans Tuning)
MOTUL fully synthetic engine oil
...


lolz, thanks man :)
 
Top