My 94 Integra LS

[Integraguy04]

everything looks awesome, hows the new setup treating you?

honestly i havent driven my car since i went racing lol

Its taken me a few weekends to get everything put back together after racing...i had a decent amount of stuff to fix

 

[Integraguy04]

here are some more pics from my phone of the meet

this is my brother 1994 Acura Integra RS

And i got some Password JDM bumper holders cuz i was holding it together with zip ties.

 

[Integraguy04]

Soooo something was in the road on my way from home last week on the highway....had no chance to react and this is whats left of my CF front lip

 

[Integraguy04]

so not only did the above happen...but yesterday i was driving it to work and the timing belt decided to go going to be taking it apart sometime to see what the damage is - shredded about 8 teeth or so off of the timing belt

teggy is on hold fml...

 

[Integraguy04]

cylinder 2 is done - has zero compression - going to tear the motor apart sometime in the near future.

 

[AcurInteg96]

Hopefully the valves didn't drop onto the pistons. Stupid interference motors.

Sent from my EVO with tapatalk.

 

[Integraguy04]

here are some pictures of the bent valves

***If you are using aftermarket cams in your car - i recommend you use a "Gates" Kevlar reinforced timing belt or Toda Belt***

 

[Integraguy04]

Got my estimate from King Motorsports -

They are taking all the vales out, cleaning them, and putting new valves in on the ones that were bent.

the valve guides were cracked as well on the two that were bent really bad, and they are re-seating all of the valves just to be on the safe side...

looking around 600-800 dollars, i think of it as a lot less than getting a new head and paying to have it p&p again

 

[Integraguy04]

got some goodies while the cylinder head is off...

got a Autometer Oil pressure and Oil temp sensor

 

[Integraguy04]

 

[DCristobal]

serious car bro. i like the wheels and the meaty tires. I also have a headlight cut out for the intake. car looks good.

 

[Integraguy04]

serious car bro. i like the wheels and the meaty tires. I also have a headlight cut out for the intake. car looks good.

thanks man!

 

[endo617]

Havent been here in a while, sorry hear about the bent valve, its back to the drawing board but it should come out to much better this time around

 

[Integraguy04]

Havent been here in a while, sorry hear about the bent valve, its back to the drawing board but it should come out to much better this time around

yeah thats what im hoping - i got a kevlar re-enforced timing belt from Gates so that should help.

Cylinder head I should get back shortly from King Motorsports.

 

[Integraguy04]

Got the cylinder head back...