Help! Powering up JDM ITR Doors

[Nistyle]

I recently installed a pair of 99 JDM ITR doors on my LS. I found out that the connectors were completely different. I tried to use my old usdm harness ,but the driver side door (left) has the passenger side connectors so that they won't connect to the driver side switch. Has anyone done that conversion before?? Pictures would be helpful! Thx!

 

[Samurai_Blue]

you have to switch the switches over. its going fromrhd to lhd

 

[Nistyle]

you have to switch the switches over. its going fromrhd to lhd

But the issue is the USDM driver side door harness won't fit the JDM passenger side doors' connectors. I can definitely use the USDM passenger side harness on the JDM passenger door but then i don't have access to the mirror adjusting and door lock.

 

[Nistyle]

Is there any way I can modify the connectors??

 

[jcrabb13]

Is there any way I can modify the connectors??

they're wires, so yes you can modify them...you just have to know how. lol

 

[Nistyle]

they're wires, so yes you can modify them...you just have to know how. lol

Does anyone know how to repin the passenger side window motor connector and make it fit on the driver side??