1992 Integra GS no start...

J@meson

New Member
Ok well I bought a 92 GS a few weeks back with a spun bearing, Yanked out the B18A1 and found a B18B1 locally so I dropped that in today. The previous owner wired up a push button ignition (correct way not hacking the harness) because the car would not start with the key. So I removed that and hooked the car up factory and now im adressing the no start with the key. Turn the key to the run position everything lights up, turn to start and you can hear a relay under the dash click but with no response from the starter its self. Im new to Honda's and only bought this car to sip gas around town.
 

Prozon

Kris
Look on the starter, there should be two wires. One is the battery cable, slightly larger. And there should be a small wire that slides onto a tab. It is the signal to tell the starter to engage, make sure it is hooked up.
 

J@meson

New Member
Look on the starter, there should be two wires. One is the battery cable, slightly larger. And there should be a small wire that slides onto a tab. It is the signal to tell the starter to engage, make sure it is hooked up.
Yes it is connected... Like I said, everything is hooked back up the way it should be... Im thinking it may be whatever is between the ignition and that lead on the starter... I just dont know what relays go or do what on this thing..
 

Prozon

Kris
Ignition switch, or that wire has faults- is my best guess.
 


J@meson

New Member
And I resolved it, There was a plug under the dash comming from the ignition (key) that had a Black with white stripe wire yanked out of it.... I placed it in there and wiggled it and the starter cranked... Just need to splice it back together but thanks anyways.
 
Top