Okay...can yo u tell me what's missing please?

Detman101

Da9 newbie
Here are two pics of my engine bay. Can you please tell me what is supposed to be plugged into that nipple on the top of my valve cover?





Also, if you see/find anything else that needs fixing, please tell me.

I'm completely lost.

Thank you.
Dm
 

teggyboi59

95teggy
Yep agreed ^^^ because my obd1 valve cover only has 1 niple nd when swapped ma motor I got an 97 obd2 nd had to change valve covers only bro ... I changed the intake manifold as well
 


Detman101

Da9 newbie
teggyboi59 said:
Na jst plugged it up bro... u already have the the other niple plugged in the intake right???
Click to expand...
Yes sir. The other nipple has a hose going to the AEM intake already.
I will plug it up.

I will also plug up those two little holes in the AEM intake near the intake manifold.

=]
Dm
 

teggyboi59

95teggy
Detman101 said:
Yes sir. The other nipple has a hose going to the AEM intake already.
I will plug it up.

I will also plug up those two little holes in the AEM intake near the intake manifold.

=]
Dm
Click to expand...
Oh yes u should plug those two lil holes I bearly saw em
 


Detman101

Da9 newbie
Done and done!

hey, do you have any recommendations on what to plug those holes in the AEM Intake with? I was thinking of soldering metal over the tops of them or using a rubber patch like for tire repair.

I don't know how I'm gonna plug the hole for that PCV valve thing.

=\
Dm
 

teggyboi59

95teggy
Detman101 said:
Done and done!

hey, do you have any recommendations on what to plug those holes in the AEM Intake with? I was thinking of soldering metal over the tops of them or using a rubber patch like for tire repair.

I don't know how I'm gonna plug the hole for that PCV valve thing.

=\
Dm
Click to expand...
In Pepboys or autozone they sell sum spectre rubber deals that could take kare of that bro or jb weld kould work to jst make sure the surface its clean before putting it on there bro
 

da9 b20 beast

New Member
u dont really need to plug the lil holes on the intake..i dont have nothing plugged to then and it doesnt affect my da in any way...and u could actually leave the pvc plug thats already there and wont do no harm..a buddy of mines has it like that.
 

Detman101

Da9 newbie
teggyboi59 said:
In Pepboys or autozone they sell sum spectre rubber deals that could take kare of that bro or jb weld kould work to jst make sure the surface its clean before putting it on there bro
Click to expand...
Awesome! I think I will JB Weld it on sunday while I'm out of the house.
Set it up Saturday night and let it dry over the next day.

thanks again!
:)
Dm
 

Detman101

Da9 newbie
da9 b20 beast said:
u dont really need to plug the lil holes on the intake..i dont have nothing plugged to then and it doesnt affect my da in any way...and u could actually leave the pvc plug thats already there and wont do no harm..a buddy of mines has it like that.
Click to expand...
Well...I know that small diirt and dust won't REALLY hurt the engine because it will all get exploded anyway in the cylinders, but I don't want anything going in there that should be getting picked up by the filter. I haven't actually had the engine torn open to inspect the condition on the inside since I bought the car so I'm really nervous about all these open holes with nothing attached to them.

:???:
Dm
 
You must log in or register to reply here.
Top