Prozon's '93 GS Build

Prozon

Kris
You know that guy that did my exhaust?
Still haven't paid him. :thumbs up

It's not the exhaust anyways, it was the bolts on the flange, I need to get new bolts and get lock washers for it.

Edit:
Although, that bastard made my whole exhaust ONE PIECE, so even if I lost EVERY bolt on the downpipe, my dump pipe tube would hold it on lol.
(Not sure if that's good or bad.)
 

Prozon

Kris
I haven't updated the thread in awhile so here's a small update.

I replaced all the bolts on the downpipe and installed a new gasket. Most pain in the ass thing ever. I don't know if I told you guys- but I had wired up my fan backwards, so that it actually promoted overheating. I also fixed that when I did the downpipe.

My speedometer cable finally gave up on life, so i've been driving with my GPS to know the speed lol. I've had a random check engine light come on, finally got around to pulling the code to find out it was the VSS. No biggy there seeing as how I have no cable to operate it.

I also ordered some sound deadening material. It should be here next Wednesday, when it gets here I'm installing the alarm and installing the interior again. I might pick up a ported box for my subs too.
 

Prozon

Kris
Well that sound deadening material came today. I started the install too. Switching back and forth between the Integra and the Jeep, so it's a little hectic.



I started doing the outer most panels, after I get done with them all along the sides, i'll pull up the carpet and cover the back/bottom. I'm also planning to cut a new board to cover the spare tire.


Started on the back, I think i'm going to pull the tail lights and the back panel, it's got a pretty bad dent in it I need to knock out. Not sure if somebody backed into my car, or kicked in the panel or something- but it's been like that for a little too long.


More of the side:


Shaved antenna anyone?

Started welding the patch in:


Body filler:



I'll post pictures when i'm done doing the sound material install and sand the body filler.
Hopefully I get it all done tonight so I can install the alarm and get the interior back together!

Updates will come soon. :thumbs up
 

Prozon

Kris
More updates!

I removed the piece under the tail lights and knocked the dents out. I covered the area under it with more sound deadening and then covered the inside of the panel itself with more before I reinstalled it.


Antenna is shaved, just need primer and paint:




More updates coming tonight! :thumbs up
 


Prozon

Kris
Guess what I did!

Yes bitches, it has happened.


Got the back done:


Started on the tire well, need to clean the bottom more and cut the board out:



I bet you guys love the lights. :thumbs up
 

Prozon

Kris
More updates!

So I installed part of the interior panels, as I went to grab my ratchet to tighten down a bolt I noticed something odd:


Yes, my ratchet fell apart. I think I must have lost the snap ring or something.. needless to say I was a little surprised.

Spare tire area:


Back seat area:


Started the alarm install:


I'm stuck trying to track down the lock wiring. The only thing the alarm can do right now is chirp and go off. I also have lost one of the sensors so I have to go on a hunt tomorrow to find it. >_<

Well it's 2am, time for bed. :thumbs up
 

jdmjim

nothing from nowhere
lol on your ratchet, looks good man!
 


endo617

Rattle Can Technician
Prozon said:
I'm stuck trying to track down the lock wiring. The only thing the alarm can do right now is chirp and go off. I also have lost one of the sensors so I have to go on a hunt tomorrow to find it. >_<
Click to expand...
From what i remember about your car in order to use the alarm PW lock function you have to run a wire in to the door to the switch because a buddy of mine installs alarms and he said thats its done on 92 civics should be the same for a DA
 

Prozon

Kris
Jim- It sucks because it was my shiny new Stanley ratchet. :p

Running a wire into the door sounds time consuming. I was reading that the wires I need are in the drivers side kick panel. However the wires I located are "DOOR UNLOCK -" and "DOOR LOCK -" so i'm not exactly sure what's going on here.
 

Prozon

Kris
Eh, I couldn't figure out the alarm so I unhooked most of it and tucked the wiring up under the dash. I'll have my friend's Dad look at it, or help me out with it. Conveniently he installs alarms.. lol.

So today I installed all of the interior and the seats, I also tucked the sub wiring under the carpet and got everything hooked up again. The sound deadening really helps quiet down the interior. It works amazing for the stereo/subs too.

I need to replace tail light bulbs, and I need to replace my speedometer cable. >_<
 

Prozon

Kris
Fuel regulator adjustment nut came loose, and made my fuel pressure a little off.
I fixed it and ended up breaking my fuel pressure gauge in the process.
I changed my brake line today to try to stop the dragging brakes, and they still drag.. way better braking though.
I think I figured out my random "No start" issue, pretty sure it's the ignition fuse. Won't know til it strands me again though.

I need to buy a new set of lug nuts and wheel studs.

And tomorrow is Import Face-Off, i'll be posting up pictures soon.
 

Prozon

Kris
I only took like ten pictures, and most of them were gay cars I was making fun of, however...

Check it check it!



Took some time to zip tie my bumper, lol.

You almost can't even tell it was totaled:


Unless you look at the fender bolts:


Or the bumper support:
 
Last edited:

Prozon

Kris
I deleted you? I didn't even know you were on my list, lol.
I just tried to search for you and you didn't come up. Send me a friend request?
 
You must log in or register to reply here.
Top