Brakes sticking

tnisbet

New Member
Hello,

I have a 92 integra with brake issues. I had a problem with the front brakes getting really hot and sticking. I replaced the front calipers, rotors, and pads. the brakes still stick. They are just fine at first, until you apply the brakes. Then they are stuck on until you let the car sit for several hours. Then, when you drive it again, the brakes are fine until you apply them, when they are stuck. It seems that the brakes have trouble returning once they are applied.
 

SOMD_GSR_STi

Flatout Performance
Try bleeding the brakes. Involves Pumping, Adding DOT3 Fluid and releasing pressure. It clears air out the lines and what not. I had same issuse but with my clutch on my 97 GSR. Im not sure if the older tegs are hydraulic or what not, but it could be worth a shot.
 

rednecklimo85

New Member
When they stick, loosen the bleeder's and see if they return. Its not uncommon to have a hose go bad and act as a check valve, so the fluid will flow to the caliper and not be able to return fast enough.
 

gugiey

New Member
Hello,

I have a 92 integra with brake issues. I had a problem with the front brakes getting really hot and sticking. I replaced the front calipers, rotors, and pads. the brakes still stick. They are just fine at first, until you apply the brakes. Then they are stuck on until you let the car sit for several hours. Then, when you drive it again, the brakes are fine until you apply them, when they are stuck. It seems that the brakes have trouble returning once they are applied.
 


Top