sticky clutch pedal

mrroosky

New Member
Yesterday when I was leaving my parking spot I couldn't change gears, I noticed the clutch pedal was stuck in the depressed position. I put my foot behind the pedal and lifted it. I was then able to push the pedal in and was able to change gears. At times the clutch pedal acted normally, but quite a few times while changing gears the pedal stuck in the depressed position. Is this a big problem? I don't know if it is a hydraulic clutch or if it only needs the linkage to be greased.:roll:
any suggestions?
 

mrroosky

New Member
You got me there......what is DA?
It is a 1994 Acura Integra 3 door LS, 5 speed.
Does this model have a master cylinder or cable that goes from pedal to transmission?
 

turboda4dr

450whp
mrroosky said:
You got me there......what is DA?
It is a 1994 Acura Integra 3 door LS, 5 speed.
Does this model have a master cylinder or cable that goes from pedal to transmission?
Click to expand...
you have a DC which is 3rd generation. looking into the thread below 2nd gen.
 


Dtackett

New Member
3rd gen hyrdo or cable clutch? either way if its a cable check the cable and see if it needs replaced, if its hyrdo it could be your slave?
 
You must log in or register to reply here.
Top