Gauge Cluster Bulb size help!

KevvvinoOo

New Member
Does anyone know if there are any bulbs in a 2nd gen cluster that will fit in my 3rd gen cluster? I'm planning on going to the junkyard and pulling some cluster lights out because there are mostly 2nd gens than 3rd gens. Anyways, all my cluster lights work except for temp, left half of RPM, right half of MPH, and gas. Anyone know bulb size and if i can buy them at my local auto store or if i need to go to the dealer?

Thanks
 

mjones73

New Member
The gauge cluster uses standard 194 bulbs... There's only three of them in the cluster, sounds like the two outer ones are out.

Don't drop the screws down in the dash while you're taking the cluster out. :)

The only oddball dealer only bulbs are the ones that light up the hazard, defrost and heater controls.
 

klutchDb7

ლ(ಠ益ಠლ)
May as well go leds. Glad to see the search function being used, I did a big ol write-up on this, including bulb sizes. Thanks for posting the link^
 

arielloza

New Member
klutchDb7 said:
May as well go leds. Glad to see the search function being used, I did a big ol write-up on this, including bulb sizes. Thanks for posting the link^
Click to expand...

Just curious about your DIY. Did you ever get around to changing your Dash Clock to a blue as well?
 


arielloza

New Member
klutchDb7 said:
No I never got that too into it haha, but it can be done I believe
Click to expand...
I did it to my 93 LS. Super simple... one flat head.. pull out light. paste clear blue fillament over the top.. use tape if necessary but you dont need it because there it pressure from the light and the clear cover. pop it back in and boom. also if you disconnect the wire that comes from the driver control interface then at night time when you turn on your lights the clock wont dim to adjust in brightness and you will have a neatly bright blue clock :thumbs up
 
You must log in or register to reply here.
Top