Stickerbombing

[Moose_Gumps]

So I sticker bombed my wink mirror but from heat/wind + the plastic on the mirror, the stickers are starting to come off. Is there some kind of spray glue I can use to prevent this from happening? Something that will hold up in heat but also seal/bond everything so its stuck in place for a while.

I was thinking puzzle glue but need suggestions.

thanks

 

[sumfilipinodude]

Try coating it in some clear coat?

 

[Moose_Gumps]

Try coating it in some clear coat?

will clearcoat stick to plastic fine? Well then again there will be no plastic to spray because it's all covered in stickers. will it hold up fine on the stickers?

 

[soccer4life]

Im pretty sure clear coat is the way to go.

 

[built_ls]

this might be getto but saran wrap it. should work good. one layer of saran wrap over the stickers and then glue down the ends

 

[camopaint0707]

try modge podge

 

[ixcocoyxi]

modge podge sucks ass.

automobile clearcoat from duplicolor worked best for me. be sure to apply light thin coats at a time. too much at one time will make it wrinkle

 

[camopaint0707]

no it doesn't

 

[Moose_Gumps]

modge podge sucks ass.

automobile clearcoat from duplicolor worked best for me. be sure to apply light thin coats at a time. too much at one time will make it wrinkle

Thanks, I'll try to pick some up and see how it turns out. Hope autozone carries it!

thanks for the help guys

 

[j13]

I dont think the heat is the problem man, its the Integra rejecting the nowadays trends...

 

[Moose_Gumps]

I think stickerbombing is a cool fad

but thats probably just because I'm young. anyway,

I put 4 thin coats of automotive clear coat on the stickers, let's hope it holds for a while. thanks for the help

 

[ixcocoyxi]

i only did it to my fender to hide the damage when my neighbor hit my car.

 

[Dfrederick2nd]

i like it it shows a persons personality who cares about today's fads integras themselves are today's fads rite? but please stay away from bike racks and rusty hoods