My 94 Sedan Build-Up - Lots of Pics = ) [ Updated Constantly... So Stay TUNED!!! ]

DailyDB8

>>>Honda Enthusiast<<<
ITRx Headlights... a little disappointed. i pictured the housing to be a tad darker like gunmetal. it looks bronze'ish instead. But considering its a an old ass used car... what can i expect. I'm hoping a nice quick sanding and buff it'll look better. so im kinda liking my old black housing better... and i freakin sold them >.<

ITR Black Housing


ITR Black Chrome Housing
 

JemmieN

not a girl lol
My buddy got some SiR-G full chrome lights. Wanna do a swap? lol
 


natron84

Member
Car looks sick. Your plans sound good so as far as suggestions go I wouldn't go too far beyond what you're going to. Good luck and keep us posted.
 

DailyDB8

>>>Honda Enthusiast<<<
natron84 said:
Car looks sick. Your plans sound good so as far as suggestions go I wouldn't go too far beyond what you're going to. Good luck and keep us posted.
Click to expand...
i'm going above and beyond!!!





Decided to ditch my old T-Support swap i did a couple years back. It was fugly and nothing lined up exactly how i wanted. so im going with the full radiator support Found a complete jspec radiator support uncut and still had misc stuff that could be useful for the replacement.

SIR-G DB8 radiator support w/ misc stuff



rad support drilled out.


Old and ugly T-support swap. (OLD support SOLD!!!)




A whole lot easier removing the support on the jspec and a whole lot harder on the actual car. All it all, it was tedious job. Lots of drilling and and banging. haven't installed the complete support yet. i need to cut out some extra sections from the USDM body.
 


Last edited:

DailyDB8

>>>Honda Enthusiast<<<
JDMxDB8 said:
Planning on upgrading to an aluminum radiator?
Click to expand...
already failed with the koyo (check a couple pages back) , full size doesn't clear the comptech header... even with the dual slim fans. Only way is if i get a half fan, and i wasn't sure if that was a good idea on a full radiator w/ ac.
 

JDMxDB8

Raceline USA
DailyDB8 said:
already failed with the koyo (check a couple pages back) , full size doesn't clear the comptech header... even with the dual slim fans. Only way is if i get a half fan, and i wasn't sure if that was a good idea on a full radiator w/ ac.
Click to expand...
I think you'll be fine with a half-sized radiator. I've seen fully built Civic and Integras with A/C run them before.
 

DailyDB8

>>>Honda Enthusiast<<<
JDMxDB8 said:
I think you'll be fine with a half-sized radiator. I've seen fully built Civic and Integras with A/C run them before.
Click to expand...
its something ill look into when i go K. ;)

another project im working on for DD. i need a custom hub adapter tho.
 

DailyDB8

>>>Honda Enthusiast<<<
JDMxDB8 said:
So you're going to be using a non-SRS JDM ITR steering wheel for street use?
Click to expand...
yup, didn't want to op for a SRS one since i'm already using a quick release. Plus with the non-srs, it looks more OE'ish with the added security. the momo monte carlo will be for the track :thumbs up

Cripton805 said:
Theres a Momo SRS JDM Steering wheel that looks sweet.
Click to expand...
yea i know! its soooo sexy, but it would be more or less a "JDM" stock car.
 
You must log in or register to reply here.
Top