18" Work Meisters on my DB?

[LSiNtegraDB7]

So, I found out that one of my Kosei's has a different offset then the rest. Thats why the passenger side front sits farther in. I was looking for new wheels and I stumbled across these Work Meisters for mad cheap. The guy's asking $450 for all 4, says stickers are on the inside of the wheel and all.

I have 2 concerns. 1, how can I tell if they are real? 2, How do you think 18's would look on my DB? I know it seems big but with the big lip and all they might work out.

Here are some pics, let me know guys.

 

[ixcocoyxi]

easiest way to check if theyre real, look at em in person and see if it really is 2 piece.

 

[Slo_Teggy]

18's are way too big for an Integra. Please don't go over 16" for these little Honda's.

Tires are going to cost more as you will need a really low profile tire and getting a shop to install them will probably cost you a lot as well as they are a bi-otch to install. You'll be cruising around on 18" rims with rubber bands around them for tires.

 

[LSiNtegraDB7]

easiest way to check if theyre real, look at em in person and see if it really is 2 piece.

Alright thanks coy.

18's are way too big for an Integra. Please don't go over 16" for these little Honda's.

Tires are going to cost more as you will need a really low profile tire and getting a shop to install them will probably cost you a lot as well as they are a bi-otch to install. You'll be cruising around on 18" rims with rubber bands around them for tires.

I realize normally 18's would be far too large, but I feel like because of the style they wouldn't look horrible.

But definitely good point on the tire situation. Thanks.

 

[LSiNtegraDB7]

This accord I think pulls it off pretty well. Would look similar on my DB.

I'll go check em out, look for the stamp/casting on the back, check if they are actually 2 peice, etc.

I highly doubt it but if they are real, I'll pick them up just because of the deal lol.

 

[klutchDb7]

18's do seem a big big, but I think most DB's can pull of 17's easily, but yes, more info

 

[AlexD]

18s are huuuuuge

 

[WAR 178]

18 are on the edge so to say.... I have had 18 on a diff. teggy ( you cant go over 40 series tires...35's work)
also depends on your suspension setup...if you are lowered, bring it back to stock height.

 

[Jack Rot]

Integra wheels should never be over 16", period.

 

[Ganyon]

I'm diggin the type r in the background of that pic.

 

[8-bit]

Edm foglight.

 

[LSiNtegraDB7]

Integra wheels should never be over 16", period.

Yeah your right, because anything bigger then 16 just looks atrocious :roll:

 

[DC4twokone]

I'd say absolutely if they were 17"s, a lot of people only see ugly 17"s on integras, but i know those CCW's are, and that looks fresh.

I also vote to see them in person.

 

[91b20ed]

get em and if they dont work out sell em for twice as much on vw vortex. alot vws run 4x100 and they run bigger rims than we do in alot of cases. being that they are low offset and have a large lip they wont look like 18s, they will look more like 17s, but this is all coming from a guy that rocks 17s on a teg so i guess im bias, lol.

 

[OGstackadoIIa]

Integra wheels should never be over 16", period.

Wtf are you still doing here?

And OP, 18 is really big, it will remind me of those avatars with the Integras and Preludes with massive wheels and camber. If that's your style, go with it; but honestly, I wouldn't do more than 17"