90tegwhite
Keep Droolin' Im Spoolin'
where is this little pain in my @SS?!?!?! my abs light wont go out and im trying to diagnose the problem...
ABS control unit
- Thread starter 90tegwhite
- Start date
90tegwhite
Keep Droolin' Im Spoolin'
my haynes manual says its lockated under a panel next to the right rear seat since mine is a 2 door... how do i get thiese panels off and what panel! thanking you for the help in advance!
90tegwhite
Keep Droolin' Im Spoolin'
the modual is inside the car and is like your ecu... when there are problems it blinks so many times to tell you the codes to narrow the problem please note for next time not to spread false informationthe sensor is behind your hub.
BrokenTalon27
W.F.O
It's behind the plastic panel that covers the rear passenger side interior. You'll have to remove the bottom seat, and pop that large plastic panel off, then it's held in place on it's bracket by 3 bolts. 10mm I think.
BrokenTalon27
W.F.O
He didn't spread false information. He just told you something related to the topic you posted that wasn't the answer to your question. The ABS sensor for each wheel is located on the hub. Should the ABS module pop a code for a bad sensor, his information will be quite useful to you.the modual is inside the car and is like your ecu... when there are problems it blinks so many times to tell you the codes to narrow the problem please note for next time not to spread false information
acetobe55
New Member
what he saidHe didn't spread false information. He just told you something related to the topic you posted that wasn't the answer to your question. The ABS sensor for each wheel is located on the hub. Should the ABS module pop a code for a bad sensor, his information will be quite useful to you.
90tegwhite
Keep Droolin' Im Spoolin'
i have already fiddle f*cked around with every one of the sensors and checked all the teeth cleaned everything.... so how does the seat come out? and my guess it would have to be a relay that controls everything or the modual itself... due to my abs not working AT ALL does the panel have any screws? or does it just "POP" off like you said?
i got at the modual... i blinks 6 times then pauses them blinks once... with that series of blinks its telling me that its my front fail safe relay... what do i do next?
i got the boots off of the relays... what relay is it? plug color yellow orange or green???
i got at the modual... i blinks 6 times then pauses them blinks once... with that series of blinks its telling me that its my front fail safe relay... what do i do next?
i got the boots off of the relays... what relay is it? plug color yellow orange or green???
Last edited: