nitrous option on my b20/vtec

[Integraguy04]

I was just curious to see what ppl thought. I have a stock block b20/vtec with a P&P head and pro1 cams...it is a really good setup and im really happy with it

On the other hand i do have a 10lb nitrous bottle and a solenoid sitting in my room. I was wondering if you thought that spraying a stock block b20/v on like a 30 hp shot or so would be safe... it would be a tuned nitrous setting on my s300.

I ran 13.5 with last year and im thinking the extra 30hp will get me really close to 12.9 thats the main reason i wanna do it

thanks

 

[sps21112]

It should be perfectly fine i would do a compression and leak down test before hand.What nitrous system are you using?

 

[Integraguy04]

its gonna be a dry but the fuel will be added through my injectors and tuned on my s300

my compression test is 220-230 across the board

 

[mjones73]

As long as the motor can handle the extra power it should be fine.

 

[Integraguy04]

As long as the motor can handle the extra power it should be fine.

i mean it should but that is what my original question was...is if the stock block/sleeves can handle the added power