only revs up to 4500

[No Rice Riley]

i just got my gsr swap in my DA, running stock ecu til i get it tuned and chipped but when i rev it, it only hits 4500 rpm. any body know why this might be? should be something simple. i know the ecu wouldnt do this it should be basically plug and play. Appreciate the help

 

[guiltyxxspark]

The tach won't read over 4500 RPM?

 

[No Rice Riley]

The tach won't read over 4500 RPM?

hmmm, like the rev cuts out too. it wont rev above that 4500 rpm at all. i need to play with it more i was just getting suggestions while im at school

 

[Samurai_Blue]

clogged cat?

 

[Alvi84]

Any check engine lights? Sounds like you are in "limp mode" but I thought that kicked in closer to 3300 rpm's.

 

[Rich-PMS]

What distributor are you running?

Does your tach "bounce" around?

 

[asteadydecline]

Any check engine lights? Sounds like you are in "limp mode" but I thought that kicked in closer to 3300 rpm's.

My first thought as well.

 

[Samurai_Blue]

What distributor are you running?

Does your tach "bounce" around?

LS dizzy works fine on the GSR you can only run one bolt through

 

[No Rice Riley]

Any check engine lights? Sounds like you are in "limp mode" but I thought that kicked in closer to 3300 rpm's.

well yea its a fresh swap i thought it would have a check engine light, but i dunno what distributer i am running. i had everything working in my other car before i took the engine out and put it in my integra. i dunno why its acting so funny now..

 

[8urcivic]

recalibrate your tps.

 

[No Rice Riley]

recalibrate your tps.

The the tp sensor? How do i do that?

 

[Rich-PMS]

You didn't answer my question-

does your tach bounce around?