endo617
Rattle Can Technician
whats do you have skunk2?good choice on the beaks bar, i have the benin asr function 7 and skunk2 combo
Endo617: Upgrade/Build Thread
- Thread starter endo617
- Start date
Samurai_Blue
Yolo Whippin'
Sway bar. Im 90% its skunk2 if not its skunk works. Its an OG skunk2 part
edit: oh yeah it is skunk2
edit: oh yeah it is skunk2
endo617
Rattle Can Technician
wow, never seen a skunk2 sway bar, how many mm's is it?
Samurai_Blue
Yolo Whippin'
21mm its a rare and discontinued part according to Skunk2 themselves
endo617
Rattle Can Technician
thats a nice piece to own
Samurai_Blue
Yolo Whippin'
right person to know at the right time kind of thing got my muffler, sway, asr, and wheels and later parts of the interior and stuff from my homie
endo617
Rattle Can Technician
What lucky guy, i drive 45 minutes to get this ASR brace for $80:thumbup: and when i get there i went to make a U Turn in a parking lot, mind you i was driving slow, next thing you know it, *Clank*, *Pop*, i stop checked, WTF?:what: my diff?, nope axle broke at the spider inside, thing was just spinning freely, no tools or jack:thumbdown, but friend showed up and i fixed it in 30 minutes elapse time, from him showing up going to autozone and install :thumbs up
Anyways, i got this, just need to buy the 21-23mm Sway bar:nod:
Anyways, i got this, just need to buy the 21-23mm Sway bar:nod:
vtecteggy617
New Member
Cars loooking niiiiiiice!
endo if you dont mind i need help installing my fog lights. let me know if you could help me out!
endo if you dont mind i need help installing my fog lights. let me know if you could help me out!
Samurai_Blue
Yolo Whippin'
Make sure those bolts are grade 10 if you didnt get it from a reputable source aka ASR, JHP etc. Theres alot of fakes
endo617
Rattle Can Technician
actually it is a fake i know it was fake b4 i bought it, kid never told me and he probably didn't know, but w/e i think it should do its job, better than those beaks sway bar adaptors I've seen, ill make sure to replace the bolts just in case
FAIL
thank you, and for help click the link, if you need anymore help PM
http://www.team-integra.net/forum/17-audio-security-electrical/174388-94-97-fog-light-install.html
Last edited:
Samurai_Blue
Yolo Whippin'
The beaks works, its just poor installation that usually goes wrong
endo617
Rattle Can Technician
lol true, but i saw that pick and got a little pensive
endo617
Rattle Can Technician
easiest thing to look for is the hex bolts that hold the brace to the mounting bracket and heres a link, plus its shows there are fake S2 manifold floating around too
http://stickydiljoe.com/category/counterfeit-products/
endo617
Rattle Can Technician
So installed my radiator a couple days ago was a little lazy taking pics, but here it is, wired up both fans and tried to make the wiring look as OEM as possible, im surprised how thick the radiator really is, i hope when i get new headers its not going to be a problem
Last edited: