Headlights for a '90 TEG?

[JhonSebastien]

I have two stock headlights on my Teg, ripped off another old Tegra (One looks stock, the other looks new, but still stock) but I wanted to get something a bit...nicer looking and brighter? I have absolutely no experience, I know absolutely NO difference between Halos and HID, etc etc. So Help would be appreciated

 

[BrokenTalon27]

OEM Stanley JDM one pieces look best in my opinion. One of the only JDM mods I actually have...

 

[dateg88]

First off halos are the rings that light up like on a BMW not that brute in my opinion where as hids are very brute depending on the bulb u get and are relatively inexpensive compared to halos. I have jdm 1 piece blacked out headlights with 8000k blue bulbs and people flash there high beams at me all the time and there my low beams lol lmk if this helped at all

 

[Ilovemy95teggy]

JDM one pieces, HID's, and you will be set. HID's are a bulb that runs off of a ballast to provide the bulb digital power. the HID's are made of xenon if im correct, and take a minute to warm up to the color (temperature in Kelvin) that the bulbs are. and, HID's are almost always brighter than any stock OEM bulb. no matter the brand. make sure you get a relay harness because the bulbs draw a bit more current than stock to ignite, but while running run off of less current. Halo's are a trend in most cars. they're just a CCFA tube filled with gas that is lit to give it the "bmw" look.

 

[guiltyxxspark]

Get OEM Stanley one piece lights. Anything else looks half ra-tarded.

 

[JhonSebastien]

OEM Stanley JDM one pieces look best in my opinion. One of the only JDM mods I actually have...

Ha. then begs the question, what is JDM? Yea, not really into the entire Aftermarket Scene yet

 

[guiltyxxspark]

Ha. then begs the question, what is JDM? Yea, not really into the entire Aftermarket Scene yet

Japanese Domestic Market. It's the current trend in the import car scene. It's slowly dying off thankfully.

 

[nathan_carmona]

I have a set of OEM usdm ones for sale if you decide you like em and want a good set.

 

[guiltyxxspark]

VA owns this thread. Reppin'!

 

[nathan_carmona]

VA owns this thread. Reppin'!

lolz :lol:

 

[red.line]

I have a set of OEM usdm ones for sale if you decide you like em and want a good set.

Pics? One of my headlights has a hole in it from a rock and I'm thinking of staying with the 3 pieces if I can find some minty ones.

 

[JhonSebastien]

I have a set of OEM usdm ones for sale if you decide you like em and want a good set.

I just got new ones that are OEM. Just noticed my left lowbeam doesnt work, but illuminates with the high beams on ._. new bulb. Damnit. I need new side lights since the casing is shattered from the accident, but Maaco is supply new ones for 50$ each side. I live in California, prob should add that to my profile. I probably want to go with a one piece? my current 3 piece are a bit loose on the left fog lamp, but it isnt completely bolted on (the Tie bar is bent back 4 inches, getting it replaced and my entire core support straightened and pulled out.)

I went under the back of a 95 Integra ._. His bumper was scratched, my lights were shattered, hood fubared along with my radiator and tie bar being pushed back 4 inches. Another half inch and a few pipes would have been fucked, along with my radiator, which is completely undamaged. No leaking fluids either. Lucky me?