Got some work done today
Ran the "Amp remote wire" along the drivers side with a switch on the lower drivers side kick panel so that i can turn the amp on and off when needed
Ran some Knukonceptz rca's on the passengers side, under the carpet and under the seats as well
Ran the 0g straight from the alt to the rear battery along the drivers side under carpet and seats, with TWO fuses in between
Battery is on the right corner but im gonna change it to the left side so the fuse stays under the carpet, also when the box is in the battery wont have any room to move
Heres where the amp will be grounded(4g) and the battery (0g)
Tomorow i work 7am-7pm FML
Going straight to Lowes for some MDF having them cut the top and bottom to the box and ill do the smaller cuts at home
I have friday off so it should all be done by FRIDAY!