Tower Strut Bar

[DustinXIX]

Absolutely, you just have to move stuff out of the way, then put it on ans replace everything you removed back to its spot

alright, thanks alot :thumbs up i thought about doing that but didnt know if the ba would conflict with putting everything back in its place.

 

[hgocasca]

Shouldn't

 

[OGstackadoIIa]

I've got the SPW front and rear strut bars sitting in the garage right now. Let me know if you want them.

^^That's what you're looking for! Don't buy brand-new; I got mine off someone here and I paid less than half the retail cost :thumbs up

 

[hgocasca]

Retail is $20...... you'll be fine

 

[asteadydecline]

What do you guys recommend as far as strut bars that fit with ABS? The cheapest I've found is about $80+.

 

[Ganyon]

way too much.

 

[asteadydecline]

Yeah, I know. That's why I'm asking. I found a list of bars on g2ic that fit the ABS models, but I don't want to pay that much.

GAB $200
Spoon $160
Lightspeed $150
Z-Speed $150
Greddy (Trust) $100
Momocourse $100
Tenzo-R $90
Matrix $75
Pilot Motorsports $65
OBX-R $60

Or is it worth it to just buy a non-abs bar and try to figure out how the hell to rearrange everything?

 

[Ganyon]

here is this one. http://www.amazon.com/DNA-FRONT-UPPER-STRUT-INTEGRA/dp/B004G7W7JK/ref=sr_1_8?ie=UTF8&s=automotive&qid=1297122346&sr=8-8
Or
http://www.amazon.com/90-93-Acura-Integra-Strut-Front/dp/B003G9EU30/ref=sr_1_3?ie=UTF8&s=automotive&qid=1297122346&sr=8-3

 

[asteadydecline]

And those fit with ABS? I just went out to my car and looked, and it's definitely not as simple as "move stuff out of the way, then put it on ans replace everything you removed back to its spot". The ABS reservoir is much taller than where the bar would go..

 

[hgocasca]

I'm sure plenty of people will agree with me on this, it's one of the few times eBay is your best friend, just ordered front and rear tower bars, $40 shipped, work just as good as the $200 ones, I'm a person that notices everything when it comes to the feel of my car, little to no difference from eBay to the expensive ones

 

[DarkDB1]

here is this one. http://www.amazon.com/DNA-FRONT-UPPER-STRUT-INTEGRA/dp/B004G7W7JK/ref=sr_1_8?ie=UTF8&s=automotive&qid=1297122346&sr=8-8
Or
http://www.amazon.com/90-93-Acura-Integra-Strut-Front/dp/B003G9EU30/ref=sr_1_3?ie=UTF8&s=automotive&qid=1297122346&sr=8-3

Those won't fit ABS... That list is pretty much the only ones I know about that fit.

 

[asteadydecline]

That's what I was afraid of. I know the OBX bar goes for $30 on ebay, but I don't have the means to paint it in my apartment. May have to just go for it.

 

[guiltyxxspark]

Get the Spoon one.

 

[Samurai_Blue]

carbing

 

[asteadydecline]

Now if I could afford either of those, I wouldn't have posted in this thread asking about cheaper ones =P