ct my $150 db1 build

[lsjdmteg]

rattle can?? do you mean the bumpers and fenders? if so thanks took al long time of taping and prep work and a lot of patience and layers
i started with like 600 to remove the clear and tehn worked my way up tp 2000 i used water and soap at the same time

 

[paoloDa92]

okay ima try that man.

so just 600 then work up to 2000 grit? making sure the headlight is wet? then just polish kit?

 

[lsjdmteg]

yeah use warm water and wipe it from time to time and make sure that u get all the clear off before u start to move upp at first ull see all the scratches and stuff but when u work ur way up to a finer papeer they will go away

 

[paoloDa92]

shit bra, im kinda scared i might fuck up my one pieces!

 

[lsjdmteg]

were u from

 

[lsjdmteg]

u can also just buy the restore kit clean ur lights wit windex and the just use the buffing kit it works pretty good

 

[paoloDa92]

northwest. by portland.

yeah i bought the turtle wax came with the pads and shit. but it didnt work.

 

[lsjdmteg]

the 3m one is good trust if u sand it and take ur time u wont fuck up these were my first set i ever did

 

[lsjdmteg]

so the key was stuck in the ignition cuz i had to do a lil research on the wires to bypass to get the key out. so basicaly i had to splice the green and white wire on the ten pin connector . so instead of hacking up the harness i removed the plug from the actual shifter.

so i cut and spliced the two wires

so i sodered and taped the two wires together

i then covered them with some of the wire covering that was originaly on the wires

then taped over that

this is the connecter from the cars harnes

just plugged the plug in and the key comes out

now the key comes out and just gota clean up the car and finish putting everything back ogether

 

[Rich-PMS]

Looks good.


You can sandblast the header to clean it up nicely

 

[lsjdmteg]

Looks good.


You can sandblast the header to clean it up nicely

i dont have acces to a sandblaster and dont have extra cash to pay to getit done right now.
also the fucking crossmember bolts are stripped and it wont come off so im probably stuck with the stock headers and exhaust till i can figure out how to get it off

 

[lsjdmteg]

im looking for another 4 door with a better body than this one because the car was rear ended before i got it and it pisses me off lookingat the rear end off aligned

 

[Rich-PMS]

It's a shame you're not close, I'd say bring over a 6pack and let's do work!

 

[lsjdmteg]

new jersy aint far im in newark all the time my motorcycle club has a chapter there. idk if you heard of us were called thug riders. n youd be drinking the 6 pack alone lol i dont drink bear but id buy 2 pack just for you lol. i like grey goose yager shit thatl get me so drunk that i would actualy drink a beer lol

 

[Jabes]

damn dude this cars look good, glad that the auto to manual mount worked out for you