Removing water in headlights

[JDMB18civic]

water in lights

How do you get the water out of lights??

 

[k624ash]

I used a hairdyer, and a vacuum. there really is no good way, it takes forever. If you manage to seal up the headlight properly it will all make its way out eventualy. I had problems with one of mine. I took it out and attempted to seal it 3 times before i got it. and then just a couple days ago i noticed some condensation, but only a little and it was gone in a couple days.
get some silicon and lay it over all the spots where its sealed toghether, if you can anywhere pull off the old seal and redo it.

 

[Ryan]

I have the same problem. I'm going to try to get it out tomarrow , i'll let you know if i have any sucess.

 

[DarkRevs2.0]

yo just take a 1/16 drill bit and drill a tiny hole under the light and it runs down the bumper with no problems ghetto but works. my homie had a lake in his crx tailights and never had to worry about it since after we put a hole in it.
RR

 

[JDMB18civic]

its not like a "lake" but more like condensation <spelling

 

[JdmITRCinci]

i took the smallest drill bit i could find and drilled a tiny hole in the corner. That hole allows condensated water, and evaporated water to release out. I did it w/ my tails and i havnt ever had a problem since

 

[dakid88]

I have a problem that is more like a "lake".......I vacuumed out a whole 2 cup of water out of my headlight....this cause my healight and highbeam bulb to break, but this only happens when it rain though....is there anything that will fix this major water problem?:???:

 

[Ominous G2]

Silicone, take them out and put a bead of silicone where the lense meets the housing.

Did you check for cracks?

 

[dakid88]

I took my bumper off and removed the wholheadlight housing and found a pretty big crack in the top of the housing.....I sealed the crack up with with crazy glue and silicon...so I'm a check next time it rains and see if it's enough.....

 

[Bizkit64]

yo just take a 1/16 drill bit and drill a tiny hole under the light and it runs down the bumper with no problems ghetto but works. my homie had a lake in his crx tailights and never had to worry about it since after we put a hole in it.
RR

I've heard about that, does it not just make it have more condinsation? I used a 2 blow dryers and broke one of them... and just cleaned the seals up really well and they have been fine.