Small problems. But Urgent

Sean

New Member
Well you take your door panel off find where the motor is and see what type of bolts are holding it in and get it out it's probably pretty tight in there but if you want it bad enough you'll get it out trust me. And try the switch first you might be right.

The rear panel ... you know.. on each side of the rear seat goes all the way back to the trunk....
Sorry im new to integras. I used to own a ford. Pickup lol. Thanks and i just read the thread about seatbelts. Acura will fix it for me for free. Life time warranty.


I just hope that the heater isnt a wiring problem. Because then i have to take the damn dash out thats a pain.
Same with the door.... Its going to be a pain in the ass to fix if its the motor.
 

Sean

New Member
Some one told me there is lifetime warranty on seatbelt few years ago because of safety measures.
Makes sense to me. It should have lifetime warranty. I called acura of lynnwood. And they said they will fix anything that has to do with the seat belt FOR FREE its all warrantied
 

Russyo

New Member
the seat belts used to carry a lifetime warranty, but the motors don't. Sounds to me that your motor went out, which means you'll have to purchase it yourself. or scavenge one from a junk yard car.
 


Prozon

Kris
Glad to hear your taking the time to fix up the car yourself. I'm tired of seeing people take their car to a dealer because they are too lazy to fix it themselves.

Hmm heats coming out but wait! Its not blowing the heat out.
That doesn't make much sense. Are you saying it's warm, but it's just not blowing hard? If the fan doesn't work on any settings I would assume it's the blower motor.

For your seat belts make sure both fuses under the hood are good. If so there is one more fuse that effects it. However it also effects a few other things. I noticed it effected the temperature gauge, tachometer as well as the seat belts. In your fuse panel under the dash check the 7.5amp "METER SA UNIT" fuse. If that's all good just let the Acura dealer fix it up for you. ;)

As for the window, being covered in water, it might ruin the motor. Unplug the motor wire and try to hot wire it with a 12v power source. Positive and negative on the wires. If you can get it to work by hot wiring it, you need to look at the switch/other sources.

And the replies he got, all I can say is.. what??
I don't see how this is complaining in any way.

Your car looks great for a 17ish year old car. You're complaining about a faulty window, some minor wack suspension, and the heater? Things do evetually go out dude.

I hate it when people come to the forum and bash on their 10+yr old integra just because it's weary. Most things will evetually go bad and need to be replaced. 17years is damn good for something with that milage
He's asking for help fixing the problems. Where did you get the idea he was complaining?
Besides, 17 years is not an old car. That's practically an infant! Lol.


Well good luck fixing up the car. Keeps us posted how it all goes.
 

guiltyxxspark

Internet Hate Machine
Srsly bro his car isn't old.

Damn, everything is basically answered. Get better wheels, please. Some shitty LS meshes or blades or something. Don't be a honda-tard either. Welcome. :)
 

SnD3

New Member
I agree. Those AR wheels are beyond cool... lol I think those would look better on a civic, than the teggy! :) I am partial to BBS meshies... I had a set on my VW rabbit GTI, and loved the way they made the car look... Welcome to the board, and enjoy learning about these things! They really are what started the whole, "Ricer phenomenon!" lol Just remember, we don't rice, we make them look nice! ;)
 


JoeystegDA

New Member
After the winter... Sell those wheels asap and get something new.... those are just eww.. Just my two cents sir... Other than that, Your car looks way awesome! way better than mine for sure! good buy!
 

Sean

New Member
The bushings for the whole rearend arrived today. I got the olds ones out of the control arm. Thats as far as i could get."in washington its snowy so its freeezeing in the garage". Next i have to get the bushing out of the trailing arm. Then the other side. Its going to take a while. Its a pain in the ass to get those bushings out without a press. I might look into some different wheels. But for now these are fine. Remember im a student in high school. =D And im unemployed, its really hard to get a job atm. And i can only do what i can with the money i got, and thats not much o.o. Thanks for the support guys.
 

Sean

New Member
Ok you the Bushing in the trailing arm when u get the center piece out. HOW THE JESUS DO U GET THE BUSHING OUT o.o. Im to lazy to take the trailing arm off the car so uh yeah. Fast respond please.:shock:
 

Sean

New Member
Ok Suspension update: all bushings in just need to find the torque for the suspension. Anybody know what it is??? Going to buy Brake pads . Next Heater i think its the resistor because the defroster work. Door may be the switch havnt had time to mess with it.
Any teggy Clubs near lynnwood Washington? Pm Me or Respond.
 
Top