Need help finding the right parts.

Prozon

Kris
So I want to throw a turbo on my '93 Integra in the future. I want to know if you guys have some links of the parts you have used. I'm planning to run 8psi or so on my stock B18B1. (Just rebuilt.. 1k on it so far.)

Just want to compile a part's list. Links are what i'm looking for. I want an accurate price list.
(And no people, don't tell me to upgrade the engine, i'm running 8psi specifically so I can keep the engine stock, it's just been rebuilt.. I don't want to upgrade now.

I was going to look around individually, but I figured if you guys had some links saved from your turbo builds, it sure would save me some time! Thanks.
 

Prozon

Kris
I replied to that, I didn't mean to offend you. I wasn't literally rolling my eyes you know. I'm sorry if I offended you.
 

Ominous G2

┌∩┐(◣_◢)┌∩┐
Nah you're good, I was giving you shit. Was actually looking for the thread I put some things in last week... but that is boring.

IC pipes. Only site that sells a complete kit at the moment.
http://www.go-autoworks-store.com/go90inchpiki.html

Above site sells good manifolds, I went with Spoolin. Very nice manifold even if it isn't on yet.


List:
Turbo
Manifold
Downpipe
wastegate *
dumptube**
intercooler
oil lines
vacuum lines
injectors


*not required if you have an internally gated turbo
** not required if you have an internally gated turbo or a closed loop dumptube

That is a start. Do you have an exhaust already?
 


Prozon

Kris
My exhaust is stock, with no cat. (Which from what I've read, no cat is better for a turbo.)
I have manifold and piping kit links. The piping kit is the same link you just gave me.

For the rest of the parts though I have nothing.
 

Prozon

Kris
Thanks for the links Ominous. Any suggestions on the turbo itself?
 


Prozon

Kris
Well it won't be for awhile that I do the turbo. I want to break the engine in completely before that happens anyways. Lookin' for a good list to get set up for when the times comes though.

Thanks for the link again. I'll read that a few times and get that information sunk in.
 

Prozon

Kris
Well it won't be for awhile that I do the turbo. I want to break the engine in completely before that happens anyways. Lookin' for a good list to get set up for when the times comes though.

Thanks for the link again. I'll read that a few times and get that information sunk in.
 

avasdad

New Member
avasdad said:
I am running with a Spoolin Performance manifold and I also got the garrett turbo from him to. The manifold is strong and built very well. I am running 10 to 11 lbs on mine and have had no issues. Here is his link.

http://www.spoolinperformance.com/
Click to expand...
I used this site for my ECU and hondata but the choice of chips is up to you, They did a really good job.

http://www.hamotorsports.com/hondatas300.html

and for everything else I highly recommend HiPower, He has helped me so much

http://www.hipowermotorsports.com/
 

Prozon

Kris
Are you running 11psi on a stock motor? I heard 8-9 is the most I should go with a stock motor.. I don't want to blow it up right away or anything. I understand that turbo's decrease engine life.. but I don't want to go so far as to blow it up in 10k miles or something lol.
 
You must log in or register to reply here.
Top