what did you do to your car today?

Theasian

New Member
I didn't work on the teg but put a fuel pump and replaced a brake line on a 93 buick celeberty. And started to assemble my legacys engine. Got on head done. Grinded valves and seats, new valve seals, cleaned intake and exhaust ports, assembled valve train installed cams with new seals.

If any of you ever change valve seals in a subie I got one sug. C clamp style valve spring compresser. Its a bitch because no other style works
 

djh1991

New Member
1. jump started the battery: FAIL.
2. bump started it with coys help: SUCESS.
3. went to the auto hobby shop on base here and took off old coilovers and installed gc/konis, once again with coys help.
4. installed HID's i bought off...guess who? coy.
5. installed new front bumper, old one was destroyed.
6. went to leave auto hobby shop and couldnt jump start or bump start the car, even with like 5 guys pushing, finally was able to jump it.
7. went to autozone to buy new radiator resevoir (old 1 got destroyed...dont worry about how :p) and battery.
8. cruised along the beach here in oceanside.

good day for my teggy =]
 

jznsn2u

Active Member
I stripped a grip of gauge wires. I could possibly use them to make a getto fence.... around my integras ;)
 

Robbdance

Straight Pipes
finally got my S Techs in!
technically they were done Friday but I was at work and unable to drive until today..

new struts & springs = wooO!
 

j13

Keep It Clean
I washed and stripped the paint from wax and hard water stains, then washed and waxed.
 

bradster101

New Member
bought me a buffer and started to buff out all of fine scratches - hopefully I can be done tomorrow, and if it doesn't rain ill have pix on my build thread!!!
 
Top