exploding gasket

[HKDxSAVIER]

my vc gasket exploded from the corner on the dizzy back side and i replaced it.
so i was checking my motor again and i can see oil all along the backside vc gasket.
and were the tube is that goes to the intake it was shooting oil into the intake =\

is my oil pressure to high?
would replacing the tube and getting a breather help?

 

[Theasian]

Your pcv valve is prolly clogged. Not allowing crank case pressure to be releaved. Pop off the hose from the pcv to the intake mani and try sucking air trough it. If you can pcv is clogged and its a 5 dollar part

 

[emd513]

or just eliminate it.

 

[jdmjim]

pvc or blow by which is not good

 

[HKDxSAVIER]

so thats probably why the head gasket has tiny leak
like if u look at it closely it has oil along the head gasket


same for the vc gasket
ill check it out

thanks dudes!

 

[Theasian]

A clogged pcv will push seals out, I would also check and iss if your front main is leaking among other stuff. A pcv will not blow out a hg though. That's a sperate issue.

 

[HKDxSAVIER]

A clogged pcv will push seals out, I would also check and iss if your front main is leaking among other stuff. A pcv will not blow out a hg though. That's a sperate issue.

whats iss?

and i think your thinking of just the vc pcv.
if im correct from what ive been told and been looking at theres also a pcv
on the side of the oil filter for the crankcase>?

 

[HKDxSAVIER]

or just eliminate it.

i think it is eliminated...
went out and check and it goes to this thing thats attached to the i.m. and
i dont see a one way pcv valve thing like the ones i googled for b series......

soooo...
would that mean the thing it leads to on the i.m. is clogged?

 

[HKDxSAVIER]

hi....

 

[Theasian]

I have no clue why I typed iss. Your pcv is above the oil filter on the intake manifold. Hose goes to center of intake manifold