coy's integ thread n_n

ixcocoyxi

RS owner
its at acuraoemparts.com
not the other way around. my bad :p

part number: 08P35-ST7-201
 
Last edited:

ixcocoyxi

RS owner
well.. just found out i have 2 exhaust leaks

first one at the welds (the most forward part) on the apex'i resonator
second one at the lowest point of the N1 muffler canister

SSS FTMFW!! :thumbs up
 


j13

Keep It Clean
well.. just found out i have 2 exhaust leaks

first one at the welds (the most forward part) on the apex'i resonator
second one at the lowest point of the N1 muffler canister

SSS FTMFW!! :thumbs up
Yeah the bottom of my exhuast is scraped at the canister from going into drive ways but it doesn't leak. Apex'i resonator? Know wonder your exhuast is louder lol..I thought you had an oem res'.


Hey so to have a "hella flush" look it requires low offset wheel with camber pulling the wheel in? Does that cuase ALOT of camber wear?
 

ixcocoyxi

RS owner
for low offset, it all depends on the wheel size
not really needing to add camber (depending on wheel size)
rolling/cutting/pulling also depends on wheel size

what i did, i cut the rear fenders, rolled/pulled the front, skunk2 front camber kit adjusted fully to correct camber.
 

ixcocoyxi

RS owner
i couldnt find a pixel vers. of a 94-97 so i decided to start on something else. check it out.

**IMAGE REMOVED**

i know its sideways so tilt your head and stop being a bitch. or gtfo!!
its barely in the beginning stages so dont trip that its not perfect. itll look great when finished :thumbs up

updates will follow depending on progression
 


Last edited:

DC_Five_Earl

New Member
i couldnt find a pixel vers. of a 94-97 so i decided to start on something else. check it out.



i know its sideways so tilt your head and stop being a bitch. or gtfo!!
its barely in the beginning stages so dont trip that its not perfect. itll look great when finished :thumbs up

updates will follow depending on progression
hmmm what's that gonna be for coy?
 
Last edited:
Top