1992 acura integra question/

rnoswal

New Member
Most of the cars posted in the 90 to 93 seem to be the newer model. My battery is located in the passenger side and front of the engine bay very close to the radiator. The air cleaner and bellows are missing but I can see where the air cleaner sits next to the left side of the battery. It is a 92, has vtec on both sides of the front fenders and gs-r on the back. It has the 18A1 engine though, not a vtec.

My question is for two parts for now. most everyone has aftermarket cold air setups. I have what looks like a vacuum controlled idle part that hooks to the cable protion of the throttle linkage. I don't know where the vacuum line goes for that, and there is a funny loooking part at the end of the fuel rail, left side, close to the distributor. It has a vacuum line on top and a plug in that has no place to plug it into! My manual doesnt' clearly show where the correct hook ups for these items...I know a picture would be nice and will get one out here quick, but was hoping I described it well enough for someone to let me kow how the are hooked up.

Thanks

Russ

There is more stuff, but thought I would start simple.
 

735e32

Im MEL.
you might have to bypass the line. if i am thinking the right thing, post a pic then i could probably tell.
 

Carlos Redmon

New Member
I thrashed the vaccum crap to make way for a strut bar about 4 years ago. Its something to do with cruse control because my cruse stoped working after I did it, but I didn't care.
 

BrokenTalon27

W.F.O
rnoswal said:
Most of the cars posted in the 90 to 93 seem to be the newer model. My battery is located in the passenger side and front of the engine bay very close to the radiator. The air cleaner and bellows are missing but I can see where the air cleaner sits next to the left side of the battery. It is a 92, has vtec on both sides of the front fenders and gs-r on the back. It has the 18A1 engine though, not a vtec.

My question is for two parts for now. most everyone has aftermarket cold air setups. I have what looks like a vacuum controlled idle part that hooks to the cable protion of the throttle linkage. I don't know where the vacuum line goes for that, and there is a funny loooking part at the end of the fuel rail, left side, close to the distributor. It has a vacuum line on top and a plug in that has no place to plug it into! My manual doesnt' clearly show where the correct hook ups for these items...I know a picture would be nice and will get one out here quick, but was hoping I described it well enough for someone to let me kow how the are hooked up.

Thanks

Russ

There is more stuff, but thought I would start simple.
Click to expand...
Please post a pic. It will help us help you.
Also, be kind...get a b17 and ys1 and revive that DB2.
 


You must log in or register to reply here.
Top