jznsn2u
Active Member
I might of missed it but what are your plans for the eg? And are you gonna post it in here or clubcivic :T....? or both xD?haha that del sol doesn't look too bad!
and thanks sistttaaa
my pink dc4!?
- Thread starter alyssafacex
- Start date
alyssafacex
New Member
Ci is by far my favorite forum site, i've been lurking over on honda tech butttt idk. i'll post a thread there once the civic starts going, and i'm gonna post one on here too.
clubcivic is blah, i'll probably go there for parts and stuff :lol:and, plans for the eg...
it already has megan lcas, a tenzo r tie bar, the gsr, intake, skunk2 intake mani, my f2's and strut bars from the teg, p/s and a/c delete, and duckbill.
so.. i wanna get bigger sway bars, an asr brace, wheels, it needs a weighted shift knob (i opened the top of the one thats on it now and put bb's in there to make it heavier lolol but they rattle around), cams, eventually i want a carbon fiber duckbill, and mugen lip, and function 7's, and a paint job (it glows in the dark now :lol
, maybe cf hood, idk the possibilities are endless but thats the basics. needs a wire tuck. and turbo, eventually!jznsn2u
Active Member
Sounds good :thumbs up.Ci is by far my favorite forum site, i've been lurking over on honda tech butttt idk. i'll post a thread there once the civic starts going, and i'm gonna post one on here too.
and, plans for the eg...
it already has megan lcas, a tenzo r tie bar, the gsr, intake, skunk2 intake mani, my f2's and strut bars from the teg, p/s and a/c delete, and duckbill.
so.. i wanna get bigger sway bars, an asr brace, wheels, it needs a weighted shift knob (i opened the top of the one thats on it now and put bb's in there to make it heavier lolol but they rattle around), cams, eventually i want a carbon fiber duckbill, and mugen lip, and function 7's, and a paint job (it glows in the dark now :lol
ixcocoyxi
RS owner
ahhh yes.. hater-tech ftL!
alyssafacex
New Member
hahah
ixcocoyxi
RS owner
yeah!!... wait.. what??Ahem....
^ I want to know more about the silver thing in the middle there....
DC_Five_Earl
New Member
The secret weapon :shock:Ahem....
^ I want to know more about the silver thing in the middle there....
speedin
The Transporter
LOL, yes, I never heard her mention that car. I want to know more!
lowteg99
New Member
haha that would be my car
its an 03 gsr, nothin too special.
Brian Crower 272s
Injen dp
Perrin trackpipe
Hks high power catback (cut out resonator and welded in straight piping)
Walbro 255 hp
ARP head studs
Stock evo viii turbo maxed out, somewhere around 23-25lbs (autozone gauges arent very accurate ftl)
Tephra v7 tuning
Injen fmic
Injen uicp and licp
Injen intake and maf
Perrin foam filter
Hallman pro rx
Balance shaft delete
IX recirc bov
5500 rpm two step/antilag
Topline lifters
Act hd 6 puck sprung clutch kit
Fidanza aluminum flywheel
Megan racing oil catch can
BC racing coilovers
Vortex fins
Short antenna
Carbon mitsu badge
Poly front lip
Carbon exhaust shield
Pioneer 7" flip out
Oem Recaro seats
In dash mounted gps
Momo steering wheel
Plasti-dipped viii wheels
After i get some more money its getting a tranny build and then its getting an FP Green turbo
alyssafacex
New Member
^ hes lying, its mine, thats why all three of them are together, cause they're all mine!
jznsn2u
Active Member
shit. I need a new car just so I could be on your level :cry: btw is that your brother or somethin?
alyssafacex
New Member
hahaha. nah you're probably above my level, i can't drive the teg cause it doesn't have a license plate or insurance anymore, and i can't drive the evo (well, don't want to try) cause of that stuuuuupid clutch he put in it.
speedin
The Transporter
Plasti-dipped wheels? Thats a first, how do they hold up to the heat?haha that would be my car
its an 03 gsr, nothin too special.
Brian Crower 272s
Injen dp
Perrin trackpipe
Hks high power catback (cut out resonator and welded in straight piping)
Walbro 255 hp
ARP head studs
Stock evo viii turbo maxed out, somewhere around 23-25lbs (autozone gauges arent very accurate ftl)
Tephra v7 tuning
Injen fmic
Injen uicp and licp
Injen intake and maf
Perrin foam filter
Hallman pro rx
Balance shaft delete
IX recirc bov
5500 rpm two step/antilag
Topline lifters
Act hd 6 puck sprung clutch kit
Fidanza aluminum flywheel
Megan racing oil catch can
BC racing coilovers
Vortex fins
Short antenna
Carbon mitsu badge
Poly front lip
Carbon exhaust shield
Pioneer 7" flip out
Oem Recaro seats
In dash mounted gps
Momo steering wheel
Plasti-dipped viii wheels
After i get some more money its getting a tranny build and then its getting an FP Green turbo
And sounds like a nice ride. Hows the trans holding up for ya, The older 5's arnt exactly the best out there, but I guess its really just how you drive it, because they said the Subaru 5mt was a glass box and mine was fine when I pulled it at 120k.
Stock turbo FTW, dont you just love the lack of lag?
Plus it kicks so hard so fast you can hang the ass-end out easily.