motor mount question

[Goonmonster88]

so i found out my mounts are rotting so im wondering i found the energy suspension poly inserts, do they just go in the stock mounts and how easy are they to install if they do install into the stock mounts

 

[Samurai_Blue]

so i found out my mounts are rotting so im wondering i found the energy suspension poly inserts, do they just go in the stock mounts and how easy are they to install if they do install into the stock mounts

you just take out the mount and then squish them in and zip tie them together :thumbs up

 

[jdmjim]

it's fun

 

[BrokenTalon27]

They are easy to put in the mounts. The only difference in installing these as opposed to just the factory mount that I came across was that the rear mount is a little harder to push in. The bushing adds a just enough width to it to catch on the t bracket and necessitate the use of a small dead blow to tap it in.

 

[Samurai_Blue]

They are easy to put in the mounts. The only difference in installing these as opposed to just the factory mount that I came across was that the rear mount is a little harder to push in. The bushing adds a just enough width to it to catch on the t bracket and necessitate the use of a small dead blow to tap it in.

when i did mine alot of silicone lube helped you just need to douse the insert and the mount in some wd40 and slip and slide it in

 

[dc2GS-R]

Poly-urethane bushing are easier to install if they are frozen...lol

Seriously though.

 

[makindue84]

so i found out my mounts are rotting so im wondering i found the energy suspension poly inserts, do they just go in the stock mounts and how easy are they to install if they do install into the stock mounts

Yes Goonmonster, I think they are really easy to installed. Can you post some picture how you installed that mounts?

 

[RasIntegraGS]

yea i got the same problem, i was thinking about doing the same thing.

 

[Samurai_Blue]

Yes Goonmonster, I think they are really easy to installed. Can you post some picture how you installed that mounts?

they literally just slip and slide in...

 

[The Dro]

they literally just slip and slide in...

Sounds like a Dirty Job. But hey, Someone's gotta do it!

 

[TonyDA]

Motor Mounts Question!

Heyy wats up im new here im wondering if a 91 integra motor mount fits a 92 integra.
If you can help me out ill appreciate it thanks!!

 

[BrokenTalon27]

Only if it's a GSR. The 92-93 LS mounts are different.

 

[dave198911]

or you could run down to your local parts store and spend 24 bucks on a tube of window weld i did all my mounts and it worked great you just need about 2 days to let them cure