power steering delete q

[mirrorimg]

Interested in this Coy. I dont have a plan on removing my P/S until I get another car, but I will eventually follow the same thing youre doing.

 

[ls/lownslow]

here is the article on honda tuning when they did it on a integra :

http://www.hondatuningmagazine.com/tech/0510ht_acura_integra_type_r_racecar/index.html

Interested in this Coy. I dont have a plan on removing my P/S until I get another car, but I will eventually follow the same thing youre doing.

all the info you need is in the article above

 

[mirrorimg]

all the info you need is in the article above

I read the article. Im interested in the materials Coy has used.

I am well aware that this is not a new thing, but everyone uses something different. I, for one, would probably loop some rubber lines instead of braided lines, or use some other OEM hoses (from cars in the junkyard) to accomplish this.

 

[Samurai_Blue]

this is what ive done and its worked for a long time. take out the pump and those two hoses put them together and youre done

 

[ixcocoyxi]

ill post pics when i get home today. i still gotta hide a few wires but most of it is gone just by taking them off the clip and moving them somewhere else.

 

[mirrorimg]

Dylan didnt you go about doing this by using those hose clamps? If I do this I would rather find some barbed fittings+ spring clamps or threaded connectors to use.

Coy, what are you using?

 

[ixcocoyxi]

i reused the U hose thats in front of the ps reservoir

 

[ixcocoyxi]

before:

after:

ive also hid the bundles of plugs/wires that were on the sides of the strut tower and a few misc. hoses and wires as well (the hose that goes in front of the brake booster and the fuel injector wires)

 

[ixcocoyxi]

moar

and here's one where you could see the car and the black shroom hanging from the mirror

 

[ls/lownslow]

damn you car is clean !

can i haz ur bra?

 

[da6xsi06]

any pics of the finished product? cant really see how you looped the lines... Im trying to do the same..

 

[Samurai_Blue]

Dylan didnt you go about doing this by using those hose clamps? If I do this I would rather find some barbed fittings+ spring clamps or threaded connectors to use.

Coy, what are you using?

yeah i used some hose fittings like some T shit from autozone. I just did it for shits and giggles and now im gonna do it the right way and loop it when i swap

 

[ixcocoyxi]

im reusing the hose thats at the front end of the p/s reservoir, the same fittings that were in the steering rack, and the same clamps from the hoses.

i tried to take pics but it was too dark even with the flash. the links provided on pg1 was the same way it looks like.

 

[DUFFLEBAGLEX]

how about for a 2nd gen does anybody kno? if these steps are the same

 

[DC4twokone]

did you put a breather on yours or just loop it? if so, how do you make a breather for it