installing a header

[paoloDa92]

i need some help. im buying a dc sport 4 2 1 header from my buddy and he said it was from a 90 tegg.

so my question is how do you install it?
unbolt the screws and bolt it in?

do i need to buy some new parts to replace some of my stuff?

need help club integra

 

[dc2GS-R]

i need some help. im buying a dc sport 4 2 1 header from my buddy and he said it was from a 90 tegg.

so my question is how do you install it?
unbolt the screws and bolt it in?

do i need to buy some new parts to replace some of my stuff?

need help club integra

Pretty much. I'd plan on replacing the gaskets on both ends since they are likely sub-par on a car of that age. Just make sure to bolt the header to the head using the proper torque sequence on the bolts to ensure the mating surfaces are true. Using a torque wrench isn't a bad idea either to get the proper squeeze on the gaskets to prevent exhaust leaks.

 

[emd513]

i second that. i would go ahead and put some high heat loc tite on the studs to so you dont have the problem like i had with the nuts backing off.also check and see if your cat has been taken off, if so u will want to check for fittment in case so retard worked on your exhaust like i found out with mine. had to have it cut and a new pipe welded in its place to get mine to fit.

 

[newkid]

i third that. it must be a honda thing cuz i replaced my header gasket didnt tightn it in sequance and well i hate hot exhast. thats all i can say.

 

[paoloDa92]

so i need to replace the gasket the goes betwee the header and the motor?
do i have too?

cause the one that i got didnt come with it...

this is used

 

[DC_Five_Earl]

so i need to replace the gasket the goes betwee the header and the motor?
do i have too?

cause the one that i got didnt come with it...

this is used

Just get a new gasket man, I agree on what everyone is trying to say. It's pretty much bolt in and out just do bolt it in the proper sequence to avoid cracking and warping

 

[paoloDa92]

Just get a new gasket man, I agree on what everyone is trying to say. It's pretty much bolt in and out just do bolt it in the proper sequence to avoid cracking and warping

where can i get the gasket bro?

whats the sequence?

help a filipino bro out

 

[DC_Five_Earl]

where can i get the gasket bro?

whats the sequence?

help a filipino bro out

Here you go pinoy bro! http://www.team-integra.net/sections/articles/showArticle.asp?ArticleID=430
found an article from team integra on google :lol: as far for gaskets don't they sell them on club integra's store?

 

[paoloDa92]

i dont think they sell those gaskets so looks like im gonna use my old ones ;(

hopefully no exhaust leaks or something

haha

 

[DC_Five_Earl]

i dont think they sell those gaskets so looks like im gonna use my old ones ;(

hopefully no exhaust leaks or something

haha

try autozone ? lol

 

[paoloDa92]

Autozone you think carries em?

 

[DC_Five_Earl]

Autozone you think carries em?

I just looked on their website lol. go try it bro type in your area code to see if any local ones have any gaskets

 

[paoloDa92]

is it called the head gasket set?

lol

like this one over here.
http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?displayName=Head+Gasket+Set&currentPage=1&categoryDisplayName=Internal+Engine&navValue=15100528&itemId=528-0&parentId=51-0

 

[nizzan4u2nv]

Just buy an oem exhaust manifold gasket from the dealer or an online dealer like oemacuraparts.com

 

[DC_Five_Earl]

is it called the head gasket set?

lol

like this one over here.
http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?displayName=Head+Gasket+Set&currentPage=1&categoryDisplayName=Internal+Engine&navValue=15100528&itemId=528-0&parentId=51-0

Exhaust manifold gasket lol..