Here is what I have going on right now...

cyclotegra

New Member
Update, I took off this week from working on the car after the como meet. Tried to figure out what I wanted to do with the bigger dents that needed to be taken out. Only reason I am taking it somewhere is I don't have the necessary tools to take them out, or else I would.

I am taking the teg to a body shop on monday morning to take out some of the major dents. Should only take 1 day, will update after that is done!!

Thanks everyone for the compliments.
 

User Name:

Shake those Titties!
Your going to want to put on a few coats of epoxy primer and do your final sanding with 320 then 400 grit. JMO.
 


imcnblu

Resident G2 Guru of C-I
Coming along really well. I like the progress, I just can't get psyched up about JDM fronts anymore. There's nothing wrong with them, I just see them too often to the point to where its not as "awe inspiring" as it used to be.

There are still plenty of fine examples with JDM fronts, I just don't get as amped up about seeing these conversions like I used to. I suggest swapping in the ITR headlights before long, they just look 100x better in black housing and with HID output.

I'm definitely digging that, for the most part, you're doing it by yourself. Definitely not an easy task. ;)

keep up the good work. I'll be watching.
 

cyclotegra

New Member
Well finally got my car back from body shop after 4 days for 1 days of work. Anyways, I had them fix some of the major body work that I could not do myself, cause of experience and tools mainly. Here is what they did.

Here at the quarter, it was dented in right by the fender well half way up the fender well, they pulled it out and smoothed it out.


This spot(right at the top of the windshield corner) had 4 or 5 dents, 2 of them were really deep, not sure what they hit, but they hit it hard. Had them pull them, and smooth them out.


If you can guess what they did here, you are awesome.



Now more work by me begins, already started this morning sanding down again, and have to finish filling some minor spots on metal. Then on to the bumpers.
 

ACJett

Enthusiast
Looks like it's coming along really nice. Congrats man, keep up the good work!
 


Gorveatt

I <3 HID
cyclotegra said:
Well finally got my car back from body shop after 4 days for 1 days of work. Anyways, I had them fix some of the major body work that I could not do myself, cause of experience and tools mainly. Here is what they did.

Here at the quarter, it was dented in right by the fender well half way up the fender well, they pulled it out and smoothed it out.


This spot(right at the top of the windshield corner) had 4 or 5 dents, 2 of them were really deep, not sure what they hit, but they hit it hard. Had them pull them, and smooth them out.


If you can guess what they did here, you are awesome.



Now more work by me begins, already started this morning sanding down again, and have to finish filling some minor spots on metal. Then on to the bumpers.
Click to expand...
They filled in the antenna :p
 

cyclotegra

New Member
Little bit of an update, I finished the body work on the body(all metal body). Now gonna do the bumpers this weekend.

I have decided to go with a temp paint job until I can afford a real paint job, but it will still look good.


Also picked up a full exhaust for the Integra. DC 4-2-1 2piece header, Carsound hi-flow cat, Apexi WS2 catback. It was a bitch to uninstall the old exhuast, then install the new by myself with out a lift, :lolg: But I got it all installed. I must say I am quite pleased with the way it sounds, I like loud exhaust's, but I like the subtle sound it makes. I will probably upgrade the header at some point, and maybe opt for a test pipe at some point as well. I also like the way the tip fits on my 98 bumper, right in the cut out. Real nice.

I will post some pics of it this weekend.
 

cyclotegra

New Member
Here are some pics of the exhaust. I got a full exhaust for the teg, DC header, Carsound hi-flow cat, WS2 catback.













More pics to come, finished the body work on the bumpers, going to start prepping it for the temp paint.
 
You must log in or register to reply here.
Top