My 1990 Integra

[Turq-Integ]

So, i literally just got this Integra today, I have been looking at it for months, checking it out, and everything at this dealer, and i finally got it today. Not many problems, but i would like some input on it, the clutch works perfectly fine, but, when it is cold, its pretty hard to push in, it's not rough or anything, just hard to push, I haven't made it a problem needed to be fixed, because it's perfectly driveable, i've driven it plenty of times, test drives and such. It has never made it difficult to drive either. It's a decent car, only one major ding to the Driver Side Door, It's a turquoise blueish color. It's a 1990 Acura Integra LS Hatch Back. Any information you have on it would be great to know, I will take a picture of the engine in the morning, and post it on this thread i guess. Here are the pictures of it I have now. It's a good fixer upper car i guess, a good project.

 

[jznsn2u]

Welcome to Club Integra

 

[Turq-Integ]

Thank you very much, Glad to be here.

 

[Antx]

why is your username "turq" ?

 

[Turq-Integ]

Turquoise..Couldn't really think of anything else. Didn't feel like Putting my Initials out there or anything, so just put something about the car.

 

[Rich-PMS]

Welcome!


Post more pics!

 

[DC_Five_Earl]

Welcome to Club Integra bro, good luck on that project

 

[5speedintegra]

consider yourself lucky to have everything the way it should be.. mine has no badges, and the previous owners put the exhaust on the other side for some reason....

 

[lowazzteg]

... and the previous owners put the exhaust on the other side for some reason....

bc it's hella sick jdm yo

 

[5speedintegra]

bc it's hella sick jdm yo

yeah i guess but they did a half assed job with it. they just filled up the one on the left side with bondo or some crap, and just cut the right into the bumper on the right

 

[RobbinYoBizkits]

welcome and might i recommend start with some rims on that thing

 

[Turq-Integ]

That isn't my goal right now, they aren't a necessity, a new cold air intake is a necessity for now. and I'm not sure what else, i'm going to have my mechanic look at some things i think are problems with it today. I'll keep you updated with it as i go.

 

[alyssafacex]

welcome to the club.
maintenance is always first, along with security. get her running right before you worry about cosmetics. :thumbs up

 

[Turq-Integ]

I think i'm going to need a new clutch, i talked to my father about it. It sounds like something is moving, like in a bad skateboard, i don't know if any of you have heard that, but when a bearing goes bad in a skateboard, it sounds horrible, it sounds like that in my car sometimes just idling, but when i press the clutch it quiets up. My dad seems to think that it's the bearing, but then my clutch is already super stiff, and hard to press, but it's manageable, but now it wont go into 1st barely except from when i'm rolling a little, only sometimes it will engage at stand still. But 3rd continues to pop out after a minute or so when i'm driving. Other than the noise, the hard clutch, and the gears popping out, it runs just about perfect. So, any info on this, would be helpful. And, i think i'm going to take a video of this of the noise, and then have someone take a video of me driving, so i can show you what 3rd does sometimes, if i can catch it on video. and show you how hard it is to push it into 1st sometimes.