Need advice on these rims.

[Samurai_Blue]

i just opted for the real thing because when i went to a party someone with the offroads on an ek hatch was eye raping my gram lights lol

 

[ixcocoyxi]

id definitely get the offroads over those xxr's

 

[black integ]

Turbo

Anyone recommend a company for turboing my 95 LS? Im lookin at Turbonetics. Thanks

 

[DumaDa9]

wtrandom ass post, dont get 0 offset wheels if you're not ready to slam your car and heavy amounts of camber

 

[ixcocoyxi]

wtrandom ass post, dont get 0 offset wheels if you're not ready to slam your car and heavy amounts of camber

x2

cutting the fenders will help with the fitment too

 

[heykosal]

love love LOVE the Off Roads!!!!

 

[DumaDa9]

x2

cutting the fenders will help with the fitment too

i personally didnt have to cut, just rolled and pulled

 

[User Name:]

bootleg te37's - rota grid/ rota grid offroad.

Offroad - ( you'll rub with these if you don't have camber )

I'm likeing these! I'm not gonna drop it all the way. Maybe just some lowering springs. Hmmm, 15's or 16's? And the blue teg is makin me fap! fapfap!

 

[BrokenTalon27]

I'm lookin into buying a set of these,

http://cgi.ebay.com/ebaymotors/15x8-XXR-522-BRONZE-WHEELS-RIMS-XB-E30-AE86-MIATA-_W0QQcmdZViewItemQQhashZitem35a8fbf2caQQitemZ230468350666QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

There 15x8 with a zero degree offset. Is anyone running that same size with the zero degree offset on there gen2 teg? And if so could you post some pics? Will it rub or stick too far in or out? Please reply!

Offset is measured in MM, not degrees.

As far as wheels go, I wouldn't run something you have to have a shit ton of camber to make it clear after you roll the fenders. If you have to go so far as to cut the fenders to fit them, find a different wheel.

 

[ixcocoyxi]

i personally didnt have to cut, just rolled and pulled

i just rolled/pulled the front but i cut the back.. i didnt wanna have the rear pulled due to some previous damage and i didnt know where the bondo was on the rear..

Offset is measured in MM, not degrees.
As far as wheels go, I wouldn't run something you have to have a shit ton of camber to make it clear after you roll the fenders. If you have to go so far as to cut the fenders to fit them, find a different wheel.

ive cut the rears on mine. didnt take that long and it wasnt that hard to do to make em fit.. the end result was a plus.. so whats the matter with that??

 

[User Name:]

i just rolled/pulled the front but i cut the back.. i didnt wanna have the rear pulled due to some previous damage and i didnt know where the bondo was on the rear..



ive cut the rears on mine. didnt take that long and it wasnt that hard to do to make em fit.. the end result was a plus.. so whats the matter with that??

Rusting issues if you didnt seal them up good after cuttting.

And i've actually taken rims and layed them face down on the mill at work and shaved some off the back side to pull the wheels in more.

 

[killakev91DA]

I'm lookin into buying a set of these,

http://cgi.ebay.com/ebaymotors/15x8-XXR-522-BRONZE-WHEELS-RIMS-XB-E30-AE86-MIATA-_W0QQcmdZViewItemQQhashZitem35a8fbf2caQQitemZ230468350666QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

There 15x8 with a zero degree offset. Is anyone running that same size with the zero degree offset on there gen2 teg? And if so could you post some pics? Will it rub or stick too far in or out? Please reply!

Get some Rota Track R's