Wire tuck question

Canadiandb1

New Member
So im going to start wire tucking my car, i have a new gel battery that im going to relocate to the trunk and the ac is already pulled out. Since i drive this car almost every day i was wondering if i could pull another whole wiring harness from the same year integra and use that to for the tuck because then i could make the harness i need and pull the old one out and put the one i made in so i have less down time?

also since im going to bring the fuse box inside the car and the battery to the trunk would it make it easier to run the battery directly off the alternator with a fuse in line or no?
thanks for the help
 

jznsn2u

Active Member
yes you can use a different integra wire harness for your car. i'm not sure about your other question bro but someone else will :) good luck with your wire tuck.
 

Slo_Teggy

Slow Driver
If you don't have another way to get around, don't do it just yet. Wire tucks are timely even if you run a second harness and just unplug everything and plug it in. You have a lot of work ahead of you. Maybe book a few days off of work to make a really long weekend. Don't expect it to go flawless either. Old Honda's always have more wrong then what you know.

There really is nothing "easy" about doing a tuck. The easiest way around this is not touching the wiring at all. There are a ton of plugs and a ton of wires that you will need to move. I've never finished a full tuck but it takes long.
 

Canadiandb1

New Member
Thanks for the input, I have a street bike that I can ride just depends on weather.
Hoping to start this weekend
 


cripemaster

New Member
I'm gonna start tucking mine this weekend too. Maybe if I need help I'll hit you up and vise versa. I'm nervous, but at least mine isn't my d.d. I just really don't wanna break anything or screw anything up =/
 
You must log in or register to reply here.
Top