Hb420's 90 DA Build Thread

hb420

New Member
Thanks man, I'm painting it the factory blade silver. When i bought the car is was a complete hunk of shit but it was silver and this color da is very hard to come by since this color was only available on a 1990 rs
 

hb420

New Member
Started taking the teg apart to try to get some work done before it gets warm again. Sarted off with a dutch of some sour deez to get me in the zone





Still have to pull the rad, fan and all of the wires for the grounds, and power.



Fenders pulled







Today i'm gonna start pulling all of the interior out including the dash and the rest of the wires in the bay area. Wheels are gonna be hopefully sold this week so i'll be in the market for some new ones.
 


hb420

New Member
Not much of an update but i finally switched out the driver side outter tie rod and the upper control arm with new bushings and ball joint. Now i have to get some new nuts and washers for the upper control arms and then a trip to the junkyard to get the cover for the upper ball joint

Before


After



Pulled the hoses and started pulling the harness out so i can clean the block off with degreaser and redo the motor harness




With the weather as nice as it is i'll be working on it some more tonight so i should have some updates with pics later
 

hb420

New Member
Today i started pulling the rest of the harness and vacum lines so i can start cleaning the motor





The pile of parts is getting bigger



And this is where i left off at and will be returning to work on it some more tonight after dinner

 
Last edited:

IOWNAC89

New Member
whats up your teg is looking hella sic. i have an 89. bought her 4 3 hundo and have been fixing her up 4 about 7 mos. u seem like u know this site pretty well and u know ur shit. this is a hella dumb question but i can not fucking figure out how 2 start thread. can you help me navigate the site to where i can post? it would b much appreciated, i have a shitload of questions , thnx.
 


Mr.Yummies

Trade Whore
I love the car man keep up the good work.

I hope to get started on my interior soon and redo some headliner and door panels!
 

hb420

New Member
da9kiddo said:
Hey Doode Question Where Can I Get One Of Those Black Front Bumper Covers??!
Click to expand...
What black bumper cover? My bumper cover is paintmatched

Mr.Yummies said:
I love the car man keep up the good work.

I hope to get started on my interior soon and redo some headliner and door panels!
Click to expand...
Thanks man, just remember to use the right type of glue when doing the door panels and get every bit of the old glue off
 

da9kiddo

New Member
No man my bad I ment that black cover that is on the hood on one of the pics u have that's says integra
 
You must log in or register to reply here.
Top