what should I use to clean my bay

[98IntegraRS]

title says it all!

I wanna clean up my engine bay, ain't the prettiest right now, Lot's of dirt etc, just wanna make everything clean!

What product(s) should i use...

thanks guys.


(This next nice day, I'mma be out all day doing stuff with the teg haha)

 

[XxCaryxX]

Soap and water, steel wool (For oil build up and gunk etc), degreaser, and lots of elbow grease and time. Also, there might be a few guides posted on the site you could look for also.

 

[kuro300]

Soap and water, steel wool (For oil build up and gunk etc), degreaser, and lots of elbow grease and time. Also, there might be a few guides posted on the site you could look for also.

x2


You should do a nice wire tuck before hand if you want saves doing that twice.
you should get a steam blower ....
works good just spray an wipe ... a hard thread brush..(not a wire brush).. for tough spot ...

 

[hulkman38]

Degreaser and water def.I like purple power degreaser cause it works good and its cheap, lesson i learned a long time ago is some carb cleaner takes off paint soo be careful with that lol:roll:

 

[.Cortez]

x2


You should do a nice wire tuck before hand if you want saves doing that twice.
you should get a steam blower ....
works good just spray an wipe ... a hard thread brush..(not a wire brush).. for tough spot ...

A wire tuck is an expensive job if you cna't do it yoruself, and if you can, its a long process.

 

[Ominous G2]

Steam is always good.

 

[blaketeg]

get some engine degreaser from your local auto parts store, let the degreaser sit for awhile and hose it off

make sure you cover up your dizzy and all the wire connectors so they dont get wet and fuck your car up

after that, just take a rag and some water and wipe everything down to get what the degreaser didnt, than use armor all on the plastics to make them shiny

 

[98IntegraRS]

get some engine degreaser from your local auto parts store, let the degreaser sit for awhile and hose it off

make sure you cover up your dizzy and all the wire connectors so they dont get wet and fuck your car up

after that, just take a rag and some water and wipe everything down to get what the degreaser didnt, than use armor all on the plastics to make them shiny

What should I cover up the dizzy and wire connections with?
Thanks for the info

 

[blaketeg]

What should I cover up the dizzy and wire connections with?
Thanks for the info

a trashbag, ziplock bag, saran wrap,etc

any kind of plastic would work

 

[j13]

I've reade Simple Green works good...but that shit is 7bucks a bottle...just get one, one spray bottle of that stuff would do your whole bay..and it doesn't have alcohol nor amonia

 

[89teggie]

i used wheel cleaner for my engine bay. i didnt have anything else, and i was broke, so i tried it. and it worked awesome.

 

[NeroCB7]

i heard you can use oven cleaner

 

[Surferman]

I always just used some gunk from walmart or wherever for around 3-6 bucks:

after:

just covered up intake, exposed wires and rotor/cap with tin foil.