question about tapping fuse box

[yournamehere]

When tapping a fuse to run an extra accessory can you tap into a fuse that's already in use, or do you have to use one of the extra fuses?

 

[tilegend]

this is from suspendedHatch

A provides a constant 12v, but we're going to use C because it has a constant 12v that is independent of any other circuit and uses it's own fuse in #13.

 

[Andrew93]

technically you can run it off another fuse and they will just be on at the same time

 

[tilegend]

technically you can run it off another fuse and they will just be on at the same time

depending on what type of circuit you're putting it on and what the load is... i normally wouldn't recommend that.

 

[yournamehere]

depending on what type of circuit you're putting it on and what the load is... i normally wouldn't recommend that.

It's just a small 4" Cathode

 

[tilegend]

just connect it to location C with a female spade connector and you'll be fine... add in a fuse at location 13 and thats it.

 

[yournamehere]

just connect it to location C with a female spade connector and you'll be fine... add in a fuse at location 13 and thats it.

Easy enough.
Thanks. I can do engine and body work all day, but I know very little about electronics.