My 94 Sedan Build-Up - Lots of Pics = ) [ Updated Constantly... So Stay TUNED!!! ]
- Thread starter DailyDB8
- Start date
newtotheteg
New Member
hey its cool to see a nice 4d integra. i just got my first integra and 2nd car last week (1st car 86 crx Si) and im wantin to do something kinda like what you got goin. keep it up ill be looking for updates 
chief_SLAPAH0
Jeff
Subscribed. Just finished my front end conversion last month. It'll be a type-r clone soon enough, plan on starting a progress thread soon as well.
chief_SLAPAH0
Jeff
For a C1? Still for sale?
DailyDB8
>>>Honda Enthusiast<<<
nada, been gathering dust and rotting away. saving miles tho
the project is questionable at the moment. i might abandon the project completely. :what:
Henok2000
New Member
after all that time and work i would never get rid of it. plz don'tnada, been gathering dust and rotting away. saving miles tho
the project is questionable at the moment. i might abandon the project completely. :what:
DailyDB8
>>>Honda Enthusiast<<<
Motor is finally piece together... sorta. A couple misc things left, a couple hoses and wat not. First time messing with an aftermarket IM so i took a little research and learning. The only thing that is making stuff complicated is that the particular manifold has 2 fuel rails. which im not opt to use but rather if i decide to hook up nitrous. but its probably gonna be plugged for now.
next step is the fuel setup, which im not sure if i should even do anything since this is a mild build. dont think aftermarket injectors, fuel rail + regulator is going to do much.
ill probably replace the valve cover, its a lil too flashy :what:
next step is the fuel setup, which im not sure if i should even do anything since this is a mild build. dont think aftermarket injectors, fuel rail + regulator is going to do much.
ill probably replace the valve cover, its a lil too flashy :what:
Last edited:
g3teg97
Super Moderator
DailyDB8
>>>Honda Enthusiast<<<
so i removed the itr aluminum a/c bracket since its not compatable with a 94-95 a/c compressor. the design is slightly different and it wont mount up correctly. however it will work if i upgrade to a 96? 97-01 compressor but i decided its something i can do later on. so back with the cast iron a/c bracket.
didn't really do much to it, cleaned things up and organized some stuff. re-trimmed the bumper so the air duct can sit more flush. fitament wasnt too great but not too bad 7.5/10. bought this years ago when they didn't make replicas yet. this one was hand made by some dude over seas. SIFu on h-t. i think he's banned now. slapped on some blue tape since i didn't want the air duct to sitting around where it can be damaged.
my 2 toys face to face.
didn't really do much to it, cleaned things up and organized some stuff. re-trimmed the bumper so the air duct can sit more flush. fitament wasnt too great but not too bad 7.5/10. bought this years ago when they didn't make replicas yet. this one was hand made by some dude over seas. SIFu on h-t. i think he's banned now. slapped on some blue tape since i didn't want the air duct to sitting around where it can be damaged.
my 2 toys face to face.
Last edited:
JDMxDB8
Raceline USA
I'm turning the DB8 into a street-driven time attack car until I can afford to get a truck and a trailer. Why make the DB8 your daily when you have your EH?soon the time will come
the debate with daily VS track is more difficult than i thought. especially with california regulatoins. so making more HP is going to be later on down the road
now i need an idea for a vanity plate, :twisted: