intake manifold questions.

[cripemaster]

i'm looking into the edelbrock victor x intake manifold for my 1990 integra. i am just wondering if i purchase it specifically for my b18a1 will i also be able to use it on a gsr motor or even an itr motor. any insight would be greatly appreciated. thank you for any help you can give.

 

[TegSox]

I don't know if a B18a head has the same IM bolt pattern as a GSR or an ITR (I doubt it matches either one), but I can tell you that the IM bolt pattern for the GSR and the ITR are different. So it will only fit on one or the other, if it'll go on either at all.

 

[Mildsquare]

it will fit with some modification but, the channels for the coolant are different between all 3 setups. you can get it work but you might as well just get it for the set up you plan on running in the future to save you money and time in the long run.

 

[xusake]

Ah, It been awhile since I've post, will since cripemaster already address the topic. I would like to ask a question also, I'm almost done with my project but I'm stuck at this point where to decide for my IM. Im not sure if the B17a1 head is basically identical to the B16a or not but I wanted to get a blox IM., but blox only sell B16 and B18 IM any advise here would be help full. Thanks guy's

 

[tilegend]

Ah, It been awhile since I've post, will since cripemaster already address the topic. I would like to ask a question also, I'm almost done with my project but I'm stuck at this point where to decide for my IM. Im not sure if the B17a1 head is basically identical to the B16a or not but I wanted to get a blox IM., but blox only sell B16 and B18 IM any advise here would be help full. Thanks guy's

B16 and B17 cylinder heads are the same casting... PR3. so yes same IM.

 

[mirrorimg]

Im just going to throw this one out there. Is your motor stock? I dont see any point in an IM unless you have upgraded the motor.

 

[TegSox]

it will fit with some modification but, the channels for the coolant are different between all 3 setups. you can get it work but you might as well just get it for the set up you plan on running in the future to save you money and time in the long run.

So in other words....it won't fit.:roll:


Even though I wear a size 10.5 shoe, I can get a size 5 to fit WITH SOME MODIFICATION.

 

[xusake]

Im just going to throw this one out there. Is your motor stock? I dont see any point in an IM unless you have upgraded the motor.

it rebuild but i want some performance part in it to make the motor stand out, with the wire tuck that im gonna be getting.

 

[tilegend]

a rebuilt motor that consists of what? just stock parts...

im not sure what an intake manifold really has to do with looks unless you're getting a carbon fiber AIR manifold..

 

[PushButtan]

I know resurrecting old dead threads is frowned upon but my tons of searching led me here and I have a simple question


Thanks to an idiot friend im in need of a new manifold and have been offered a gsr(b18c) intake manifold for free to replace the manifold on my b18a1. So far from research its come up that minor modifications would be needed to get it to fit. Is anybody able to tell me how much/what is needed?

Not really wanting to buy another manifold (so so broke)

 

[BigMac88]

I've never even heard of it being done. The GSR mani is a reverse ramhorn 2-stage manifold and I don't even know if it will bolt up. Sell it on Craigslist and buy a B18a1 mani from CL as well. It will save you lots of headaches in the long run.

 

[PushButtan]

I had already tried sourcing a b18a1 mani locally but couldnt find squat . Ill see if I can sell off the gsr mani.

And I just got the car drivable.. fuuuuuuuuuuuuuuuuuuuuu

 

[94dc4]

Won't the B18B1 manifold fit?

 

[Mildsquare]

The b18 GSR manifold will fit a b18a1/b18b/b20 but you have to mod it, if you check on g2ic or honda tech you can find some stuff about it. some people have done it, not to sure on the gains, but if it's a b18a just source a b18b manifold , you have to do some stuff to it to get it to run right but it's a direct bolt on.

 

[BrokenTalon27]

http://austin.craigslist.org/pts/1529179270.html
^^^^Here's your best solution.