Power windows and locks!

[jigga18]

My power windows and locks dont work. There is power at the switch (checked with a 12v test light) what do i do next?

 

[jigga18]

oh it is a 96 gsr

 

[red98teg]

i dunno.... maybe replace the switches? and the window motors? maybe thats just me...

 

[jigga18]

ok will do.

 

[jigga18]

would seem odd both switches and windows dont work

 

[red98teg]

if they have power then maybe the door got wet and fried the motors... but you still have power so thats my thought

 

[jigga18]

theres really no way to test that theory other then buying new switches and motors huh

 

[red98teg]

i mean my first place would be a junk yard

 

[XxCaryxX]

Yeah junkyard would be your best bet

 

[jigga18]

ok.. i had some other probelms- interior lights not working and sun roof. put a new fuse block in that fixed those problems just not these

 

[jmanng]

download the manual (it's free) and it has a good section on troubleshooting the power door locks along with wiring schematic. I just went through this the last couple of days and found my system fault (broken power wire in-between door).

 

[JdMGsR96]

my 96 GSR pass. door power mirror and window wouldnt work after i converted back to obd2 i replaced the door harness and it fixed the problem you can try that..

 

[mirrorimg]

I had an issue with one of my windows (in my four door). Turned out I blew a fuse. I hope that was the first thing you checked I had tested my wires and I had power to the right switch, but it did not work until I replaced the correct fuse.

 

[suspendedHatch]

download the manual (it's free) and it has a good section on troubleshooting the power door locks along with wiring schematic. I just went through this the last couple of days and found my system fault (broken power wire in-between door).

THANK YOU. This is the voice of reason right here. Everyone else, "just throw parts at it".