98-01 usdm itr bumper on 94 gsr?

gsrcyan44

If it aint broke, upgrade
im wanting to put a usdm itr front end on my 94 gsr. they look different and i was wondering if i could use the gsr's radiator support. also i know i'll need the 98-01 itr headlights but will i need the fenders also??

thanks for the help:???:
 

dc2GS-R

Super Moderator
The ITR front bumper is the same as all 98-01 front bumpers. It just has a different lip on it.

The only thing needed to put any 98-01 front bumper on a 94-97 is headlights, corner lights and brackets and the front bumper of course.

All 94-01 USDM Integras have the same fenders, hood and radiator support.
 

99sil-teg

Jointhe Wingless Movement
dc2GS-R said:
The ITR front bumper is the same as all 98-01 front bumpers. It just has a different lip on it.

The only thing needed to put any 98-01 front bumper on a 94-97 is headlights, corner lights and brackets and the front bumper of course.

All 94-01 USDM Integras have the same fenders, hood and radiator support.
Click to expand...
Are you sure? I thought 98+ conversion was ultra rare and pretty custom :lol:
 

gsrcyan44

If it aint broke, upgrade
ok. thanks for the help. what about the bumper support? need swapped also or same as 94-97?
 


99sil-teg

Jointhe Wingless Movement
XslickwhitetegX said:
no bumper supports are the same ... just the healights,corner lights,corner brackets , and of course bumper
Click to expand...
You can also swap the rear bumper and rear tails... they bolt up direct too.... there are tons of parts that will swap over.. they are just more expensive
 

XslickwhitetegX

UKDM EXPERT
99sil-teg said:
You can also swap the rear bumper and rear tails... they bolt up direct too.... there are tons of parts that will swap over.. they are just more expensive
Click to expand...
yea and there's also the passenger/ driver mirror for exterior, if you want to be technical :p but I was just answering his question about support
 


99sil-teg

Jointhe Wingless Movement
Noodler said:
thats the jdm front conversion. which needs welding. and everything in front of the doors.
Click to expand...
duh... I was joking around :roll:

I'm on TI, HT and here and am active on all three.... I'm not some stupid noob lol
 

g3teg97

Super Moderator
We have a thread on this.

You only need the '98+ headlights and bumper. The turn signals should come with it, if not you'll need those and the brackets for the turn signals which would be in the bumper itself. Also the mirrors from 97-01 are the same. No need to change anything else.
 

Samurai_Blue

Yolo Whippin'
g3teg97 said:
We have a thread on this.

You only need the '98+ headlights and bumper. The turn signals should come with it, if not you'll need those and the brackets for the turn signals which would be in the bumper itself. Also the mirrors from 97-01 are the same. No need to change anything else.
Click to expand...
the mirrors are actually 96+
 
You must log in or register to reply here.
Top