engine vibration when stopped

[hunterbrooks82]

my 93 Integra LS vibrates significantly when at a stop and idling. If I put transmission (automatic) in neutral the vibration disappears completely. My motor mounts seem fine. What could be causing this? A response would be greatly appreciated. THANKS!!!!!!

 

[Kuchtaboy]

tired motors and a low idle.

B series motor's don't have balance shafts to help get rid of that

 

[hunterbrooks82]

The motor seems very strong. If I adjusted the idling do you think it would help?? By the way, ty for responding.

 

[g3teg97]

Everytime I've seen this issue it was the motor mounts ('88 ls auto was the car)

 

[hunterbrooks82]

A mechanic told me the motor mounts were fine. Could it be a worn bushing?

 

[SpooledupRacing]

A mechanic told me the motor mounts were fine. Could it be a worn bushing?

look for yourself and see if they are cracked they are bad.. possibly just tired and the rubber has loss some of its rebound.

I'm sticking with motor or trans mounts

 

[hunterbrooks82]

thanks for the reply I just looked at them and they are not cracked. I think they are just tired like you said.

 

[hunterbrooks82]

Can the motor mounts be replaced without removing the engine?????????????//

 

[Samurai_Blue]

could it be the torque converter? this happened to a cb7 and it was a tranny problem

 

[SpooledupRacing]

Can the motor mounts be replaced without removing the engine?????????????//

yes.

 

[hunterbrooks82]

Could it possibly be the torque converter like Samurai Blue said? Is it difficult to replace the mounts?? About how long do u think it would take? I'm good with my hands, but have never replaced motor mounts before (obviously)

 

[SpooledupRacing]

Could it possibly be the torque converter like Samurai Blue said? Is it difficult to replace the mounts?? About how long do u think it would take? I'm good with my hands, but have never replaced motor mounts before (obviously)

depends on rust etc.. Take your time no need to rush.. it can be done in a day (doing them all) as long as the rust does not come into play.

 

[jdmjim]

pry on the mounts with it running and see if the vibration changes

 

[hunterbrooks82]

that seems like a good idea thanks

 

[hunterbrooks82]

wow, teamintegra.com wouldn't even let me post this topic. I just got denied!!!!LOL This site is cool. Thank you to everyone who responds.