8urcivics all-motor build

[8urcivic]

sooo you gonna build my ls or what lol jk im gonna make a trip out to the east coast one day

ill build it!

 

[8urcivic]

so i now have the new bottom end, the freshly done head and the si tranny in the car...nothing but wiring and fluids now.

 

[Samurai_Blue]

so i now have the new bottom end, the freshly done head and the si tranny in the car...nothing but wiring and fluids now.

will it work this time?!?!?1

 

[8urcivic]

it worked last time....i found out what happened to the t belt.


a rock got thrown up behind the t belt cover....i was only rocking the lower one, and i have fender liners. i assumed it would be ok.


well i paid for it....rock was only the size of a dime....cost me about 400.

 

[Samurai_Blue]

damn...i should get a new fender liner now

 

[House Special]

damn...i should get a new fender liner now

make sure you include the bottom piece. I left mine off of the under side of the bumper and my bay stays dirty now.

 

[8urcivic]

yes...and both timing covers.

 

[Samurai_Blue]

oooh i have my timing covers. i think the one on the passenger side is 50% there =D auto x did a number on it

 

[Aussie]

it worked last time....i found out what happened to the t belt.


a rock got thrown up behind the t belt cover....i was only rocking the lower one, and i have fender liners. i assumed it would be ok.


well i paid for it....rock was only the size of a dime....cost me about 400.

That's why I'm running all my covers. If I have to take them off to adjust the cam timing, so be it.

 

[g3teg97]

Didn't know that could happen...there's so much debris on these FL roads. I constantly have to clean the bay because of all the sand and dirt.

 

[8urcivic]

That's why I'm running all my covers. If I have to take them off to adjust the cam timing, so be it.

i am now....its all good tho.

 

[Anthony90]

Shits weak...





Jp

 

[JDMxDB8]

it worked last time....i found out what happened to the t belt.


a rock got thrown up behind the t belt cover....i was only rocking the lower one, and i have fender liners. i assumed it would be ok.


well i paid for it....rock was only the size of a dime....cost me about 400.

Good to know. :thumbs up

 

[8urcivic]

i worked on valve covers tonight.....did get the axles and most of the harness mostly done.

 

[Sammich]

if i come back up there and its not fixed, im gettin ur teg towed to conway...just sayin