BAD oil leak

NYDA9boy

Honda Integra DA9
wat u p yall i just finished my b18b1 swap in my 90 DA amd when i start my car oil gushes out the back of my block next to my oil filter on the left anyone know wat gose there or wat can i plug it up wit i bought the engine like that and i didnt realize it untill oil started gushing out so help me out wit this
 

DA9boy

New Member
yeah please check for that because i just did the same thing a im glad i had my old block because it wasnt put in the new block and i went away but dont over tighten and also put some kind of sealant on it because it will leak still. good luck. the size is 15/16
 


bfatdaintegra

IM motorvated
that oil sending unit is a pain if u strip the threads out but i think the part is under 20 bucks so get a new one if u do a swap u never know what will happen with the old one i did my first integra swap and used the old one and a few months later i was driving and the oil dummy light came on and i shut it down and had my friend tow it to my house and we didnt hear to ticking or knocking while it was on but i changed the sending unit and it was fine no oil light and it was faulty
 

Mildsquare

From the bay to LV
get that thing tight and sealed, also make sure the sealer cures/dry's completely before driving or else your going to have leaks and have to go and do it all over again.
 


Kuchtaboy

Unregistered User
Samurai_Blue said:
did you cross thread the oil filter or have the old oil filter gasket on the block still?
Click to expand...
either this or the oil pressure switch. I'd like to think a motor came complete, and it happens more then you think that the old gasket does stick to the block still when you pull it off. I hope you'd know better then to cross thread the filter onto the threads, but I guess anything can happen, right? lol
 
You must log in or register to reply here.
Top