konerri
New Member
Been slacking a little since it's vacation time. now it's a little behind schedule but still hopefully finish by saturday because i have an AutoX event on Sunday. So far ever day was just buying this and forgetting that. So go back out and buy that again. Finally got most of the things we needed.
The three amigos working on the car. Kong(me) trying to figure out where this clamp goes. My second youngest brother, Xay AKA "The TECH", using the high speed sander. My youngest brother, Houa AKA "The body man", doing some final checks before welding.
Houa, welding the front end
Interior almost ready for paint, just need to scoff it a little more.
Green circles are where the dents need to be pulled out. Houa did painless dent removal(PDR). NO Bondo where it's not needed.
The paint and paint supplies. Could of bought a new set of RPF1's with this.
F**K U passenger side mount!!!
grinding down studs on the fire wall for that clean look.
And my cousin was there for moral support and beer. And i had to buy the Lincoln Electric Welder too.
Also have a parts update.
8 more Skunk2 Extrended studs came in yesterday because i only bought 16 originally when i still had 16 lugs. Now i have 20 and need 4 more. It's a bitch trying to just by 4 because it's like the same price as buying 8 so i bought 8.
Also got the Skunk2 Pro-series + front camber kit. Yes, i already have the T1R front camber one but they still had to use the OEM bushings which are all f*ck up. So Since the Sk2 came with newer and better ones, i decided to get them.
Still gots lots of preping to go. Updates will follow.
The three amigos working on the car. Kong(me) trying to figure out where this clamp goes. My second youngest brother, Xay AKA "The TECH", using the high speed sander. My youngest brother, Houa AKA "The body man", doing some final checks before welding.
Houa, welding the front end
Interior almost ready for paint, just need to scoff it a little more.
Green circles are where the dents need to be pulled out. Houa did painless dent removal(PDR). NO Bondo where it's not needed.
The paint and paint supplies. Could of bought a new set of RPF1's with this.
F**K U passenger side mount!!!
grinding down studs on the fire wall for that clean look.
And my cousin was there for moral support and beer. And i had to buy the Lincoln Electric Welder too.
Also have a parts update.
8 more Skunk2 Extrended studs came in yesterday because i only bought 16 originally when i still had 16 lugs. Now i have 20 and need 4 more. It's a bitch trying to just by 4 because it's like the same price as buying 8 so i bought 8.
Also got the Skunk2 Pro-series + front camber kit. Yes, i already have the T1R front camber one but they still had to use the OEM bushings which are all f*ck up. So Since the Sk2 came with newer and better ones, i decided to get them.
Still gots lots of preping to go. Updates will follow.
